Jump to content
SAU Community

F.s Melb- Rb25det Engine Vgc Inc Turbo!

the_tonkau
 Share

Recommended Posts

the_tonkau Community Regular

the_tonkau

Posted
Posted

This is a S1 RB25DET Engine in VGC and comes complete with just about everything, including the turbo!!!! Only things missing are the air conditioning compressor, plastic cover the spark plug valley and the heat shield on the exhaust manifold. I brought a low klm(120K) stock unmolested R33 Gtst Auto a few years ago for parts and this is what's left. I drove the car with this engine and it went great , smooth idle, was lovely and quiet, blows no smoke and has no oil leaks GUARANTEED! Unlike some sellers that wash the engine and spray it with shiny stuff to cover up leaks etc, I have not washed the engine so you can see it in its actual original condition. Good replacement engine for R33 Skyline or as a conversion for your Current Project! Just had an oil change and filter as well. It's ready to go on the engine crane and then onto your trailer/ute etc . A complete engine with turbo sell for well over $2000 at the wreckers so this is SUPER CHEAP. If you would like to look before you buy please contact me (Viewing in Melb's East). PICKUP ONLY!!! It's advertised elsewhere so get in quick!

$1450

First with the cash gets it. At this price I will not hold it.

Steve

0411403081

post-1044-1272587287_thumb.jpg

post-1044-1272587374_thumb.jpg

post-1044-1272587404_thumb.jpg

post-1044-1272587448_thumb.jpg

post-1044-1272587474_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Rezz
      First time Skyline owner

      By Rezz · Posted

      Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...