Jump to content
SAU Community

Recommended Posts

1993 Nissan Skyline Gts-t HCR32 with 186xxx kms

Asking $6500 as is!! Rego ends june 22

Reason for sale being that by the end of the year hopefully I will have invested in a business or the one I am currently running! + extra money for a holiday never hurt lol..

Mod list:

JJR dump pipe

HPI front pipe

Kakimoto regu 06&R catback

Highflow cat

3A racing air filter

Split fire coil packs

Nismo reinforced clutch pedal braket

Excedy heavy duty clutch

ISC N1 coilovers

Cusco rear strut brace (3way)

GTR front strut brace

Kazama tie rod ends

Cusco castor rods

R33 Front lca's

JJR upper camber arms (front)

Power spirit rear camber arms

Hicas lock bar installed and all hicas related line removed

Gramlights 57d 17x9 +22

Kumho ku36 235/45R17 front (200ks old)

Yokohama A.drive R1 235/45R17 rear

DBA cross drilled and slotted rotors front

DBA vented rotors rear

Bendix ultimate pads all round

Serviced every 5000kms using valvoline oil & ryco oil filter

X2 new drive shafts installed (around 200kms ago, will come with spare's)

82.xxx kms diff installed (around 200ks ago) which has been shimmed and topped up with Trust diff oil

Nismo oil filler cap

Nismo radiator cap

Nismo gear knob

JJR steering wheel

Sony old skool head deck

HID

SNC00275.jpg

SNC00283.jpg

Not much has been done engine wise, as main focus was on suspension, brakes and tyres! Located in Sydney

For more info shoot me a PM!

Cheers,

Pat

Link to comment
https://www.sau.com.au/forums/topic/318743-hcr32-gts-t/
Share on other sites

1993 Nissan Skyline Gts-t HCR32 with 186xxx kms

Asking $6500 as is!! Rego ends june 22

Reason for sale being that by the end of the year hopefully I will have invested in a business or the one I am currently running! + extra money for a holiday never hurt lol..

Mod list:

JJR dump pipe

HPI front pipe

Kakimoto regu 06&R catback

Highflow cat

3A racing air filter

Split fire coil packs

Nismo reinforced clutch pedal braket

Excedy heavy duty clutch

ISC N1 coilovers

Cusco rear strut brace (3way)

GTR front strut brace

Kazama tie rod ends

Cusco castor rods

R33 Front lca's

JJR upper camber arms (front)

Power spirit rear camber arms

Hicas lock bar installed and all hicas related line removed

Gramlights 57d 17x9 +22

Kumho ku36 235/45R17 front (200ks old)

Yokohama A.drive R1 235/45R17 rear

DBA cross drilled and slotted rotors front

DBA vented rotors rear

Bendix ultimate pads all round

Serviced every 5000kms using valvoline oil & ryco oil filter

X2 new drive shafts installed (around 200kms ago, will come with spare's)

82.xxx kms diff installed (around 200ks ago) which has been shimmed and topped up with Trust diff oil

Nismo oil filler cap

Nismo radiator cap

Nismo gear knob

JJR steering wheel

Sony old skool head deck

HID

SNC00275.jpg

SNC00283.jpg

Not much has been done engine wise, as main focus was on suspension, brakes and tyres! Located in Sydney

For more info shoot me a PM!

Cheers,

Pat

nice car mann! gud luck with sale

Link to comment
https://www.sau.com.au/forums/topic/318743-hcr32-gts-t/#findComment-5214744
Share on other sites

R32Cookie - the car runs perfectly fine! the only thing that gets annoying is some clunking i get from the diff (must be because of the shims that are in there atm) and besides that the car never gave me any problems as i always took care of it =)

Link to comment
https://www.sau.com.au/forums/topic/318743-hcr32-gts-t/#findComment-5217318
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are black hose clamps as well if you care. Plazmaman for example sells some: https://plazmaman.com/product/black-hose-clamps-premium-quality-stainless-breeze/
    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
×
×
  • Create New...