Jump to content
SAU Community

Auto electrical question

uneekwahn

By uneekwahn,
in Western Australia

 Share

Recommended Posts

uneekwahn Grand Master

uneekwahn

Posted
  • Author
Posted

yeah...

thing is, i reckon just the switch needs to be replaced, because the non-auto switch doesn't go back the entire way like the auto-switch does, so I was just going to try an autoswitch in the non-autoswitch spot firstly ...

ix9 Grand Master

ix9

Posted
Posted

I was also planning to do this.... I figure I can wire something up for it. But the standard switch used would not suffice and I'd still need another "auto" switch anyway. If it's built into the switch, that'd be cool.

The Aussie S14a has the same electric window switches as the R33, anyone know if the auto switch is adaptable ?

AutoTrust Mentor

AutoTrust

Posted
Posted

The power window rollup modules available allow all windows to operate in a similar fashion up and down depending on how you use the switch. A quick press will trigger express and a longer one will allow you to stop where you want. I have only heard from my supplier about this module but have not fitted one. They would cost around $80 at a guess for 2 windows. Talk to a local shop that sells Viper alarms

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • Songo
      New kid on the block

      By Songo · Posted

      thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...