Jump to content
SAU Community

Recommended Posts

Hey Guys

There is only one great RB, and here it is! Perfect condition.

33K

N1 block

HKS step 3 2.8L kit (HKS pistons, rods and crank)

HKS 1.6mm drag head gasket

HKS exhaust and intake gaskets

HKS oil pump

HKS cam gears

HKS timing belt

HKS fuel rail

HKS 1000cc injectors

N1 water pump

Trust sump kit

Tomei 280 degree 11.5mm lift drag cam shafts

Tomei drag valve spring kit

Tomei titanium retainers

Tomei valve lifter

Race cut valves

Race valve guides

ARP head stud kit

ARP main stud kit

Race main bearing kit

Race crank bearing kit

ATI/Ross pulley kit

Race head port intake and exhaust

PM me.

Edited by rb31
Link to comment
https://www.sau.com.au/forums/topic/319827-dream-engine-28l-hks-step-3/
Share on other sites

Has it done any Km's? If so how many?

The engine has done around 9K kms. Mainly tuning and weekend driving kms. Has been to the track 3 times so hasn't really been pushed.

The torque increase using the step 3 2.8L is extremely significant. I run a T04Z and come hard on boost around 4000 rpm.

Very torquey indeed.

Cheaper to buy one good engine as opposed to blowing 3 dodgy engines!!!

Spend the savings on some brakes!

Cheers

Edited by rb31
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...