Jump to content
SAU Community

Recommended Posts

work emotions XT7

18X9.5 +20 offset

color is MHG (Bronze)

has work emotions sticker on all 4 wheels.

wheels are in excellent condition with not a single mark on them. only been driven 400kms on them.

the wheels wheel be sold with brand new federals 595. tires have not been driven on.

Price im looking for is $2600ono and for an additional $150 ill throw in the blue rays light weight nuts with lock nuts. WILL SENT INTERSTATE AT BUYERS EXPENSE. I HAVE ALL BOXES AND PACKAGING.

with 235s these are an excellent fit to an R34 GTT with no guard mods required. i didn't have any scrubbing problems at the height pictured.

4445508510_ac7a5c45d9_b.jpg

4445505260_486ab320f9_b.jpg

4445506286_d09d440786_b.jpg

4444735663_6df8688050_b.jpg

4475665307_fcd621ba0a_b.jpg

4475663137_e59704124f_b.jpg

Link to comment
https://www.sau.com.au/forums/topic/321655-work-emotions-xt7/
Share on other sites

thanks guys. if only they would fit on my chaser without silly cambers id keep em but ye.

will also trade for other rims with cash adjustments either way pending on what wheels and specs :(

also till thursday i may be able to throw in free postage to anywhere in Aus so hit me up :)

it would be fine if i lowered the car more and ran more camber. that wont be practical as with the current height i just make it into my garage and thats still witht he exhaust scraping. and iuse the car daily so running -2 or -3 camber (which what most are runnign with this spec wheels on their chaser) ill be going through tyres pretty fast.

so for now ill settle for somthing that does not require as much work to fit yet still look good :D

dude im running 18 x 9.5 drifteks on the rear of my R33 GTSt with -3 camber and my tyres have lasted me more than a yr and i use it daily, and that includes some pretty EPIC cruises with sau and with other mates not on here..... so u may not go thru tyres as much as u think, but either way whatever suits u is what ur gunna do, just thought i would offer some input for ya. and thats running tein coilovers with EDFC so it sits nice and low but high enough to not attract police attention

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...