Jump to content
SAU Community

Recommended Posts

Have organised to be there on Sunday with a mate from work chubbs.

Sunday's schedule.

EVENT CODE START TIME CATEGORY

1 R9 0900 - 0915 MX 5 Race 2 5 laps

2 R10 0920 - 0935 Alfa Romeo Race 2 5 laps

3 R11 0940 – 0959 Sports Racing Race 2 8 laps

4 R12 1004 - 1023 PRB Race 2 8 laps

5 R13 1028 – 1043 Group S Race 2 5 laps

6 R14 1048 – 1111 MX5 Feature Race 10laps

7 R15 1116 – 1139 Alfa Romeo Feature Race 10 laps

8 R16 1144 – 1206 Sports Racing Feature Race 10 laps

9 R17 1211 – 1233 PRB Feature Race 10 laps

10 R18 1238 – 1301 Group S Feature Race 10 laps

11 R19 1306 – 1415 AGTC Race 2 1 hour

12 P1 1420 - 1430 Alfa Romeo Centenary Parade 2 laps

13 R20 1435 – 1540 Production Sports 1 hour

14 R21 1545 - 1600 Group S Sprint 5 laps

15 R22 1605 – 1620 MX5 Sprint 5 laps

16 R23 1625 – 1640 Alfa Romeo Sprint 5 laps

I think if the weather stays as it is, on Saturday morning if it's dry at Wakefield I'll go there. Regardless of weather I'll do EC sunday morning.

So far it's shaping up to be one of those days to park the car on a good hill and watch from inside the car

Yeah wasn't too bad today. Just too many pace car laps.

Was pretty entertaining being at turn 2 and watching people trying to drive up the wet grass :D

MX5 gangbang

post-194-1275129938_thumb.jpg

GTR Goodness

post-194-1275129797_thumb.jpg

Audi R8 fark yeah!

post-194-1275129828_thumb.jpg

GT40, sound of this thing gave me wood.

post-194-1275129853_thumb.jpg

These 2 had an epic battle

post-194-1275129903_thumb.jpg

Pure AWESOMENESS!!!!

post-194-1275129876_thumb.jpg

The cage in the GT40 is a piece of art. Very impressive car but the sound is even better! I managed to be there for the 1 hr AGT race which finished on dusk. What a sight watch the brakes glow. Good driving too with no accidents.

The GTR must have been experiencing brakes issues as he was very early under brakes and they lit up like a candle but he did come back in the last 15 mins to pressure the Corvettes, almost taking another position into the last corner on the last lap but missed the opportunity as the corvette does have more legs than the GTR. Infact the Corvette was very quick in a straight line.

Todays race is on at 2.15 so will battle this hangover to be there!

  • 3 weeks later...

What a conflicting weekend, Mate won, our Lambo with had problems and are now further behind in the championship.

The audi and mosler went well over the weekend

I believe this round will be shown on 1 HD on Friday @ 6pm

Edited by Whiplash

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...