Jump to content
SAU Community

Recommended Posts

I have a Pioneer iPod adaptor to suit multiple Pioneer iPod ready headunits. This hides away behind the head unit, with a cord to plug in the iPod. This comes with all cables and I have the User Manual on PDF on the computer as well.

Easy to install, has power, ground, plug to iPod and then plug to back of headunit.

This can be used for the following models:

For use with Pioneer “iPod® Adapter Ready” Headunits and AV Receivers. Compatible models include:

* Full Touch-Panel Control models: AVH-P7850DVD, AVH-P6850DVD, AVH-P5750DVD

* Full Rotary Commander Control models: DEH-P9850BT, DEH-P8850MP, DEH-P7850MP, DEH-P6850MP

The following models can control the CD-IB100II through "External Unit Control", with some limitations in operation and display. Please consult the owners manual for more details.

* AVH-P7650DVD, AVH-P7550DVD, AVH-P6650DVD, DVH-P5850MP

* DEH-P5850MP, DEH-P4850MP, DEH-P9650MP, DEH-P8650MP, DEH-P7750MP, DEH-P6750MP, DEH-P4750MP, DEH-P3750MP, FH-P5000MP, FH-P4200MP

Price: $100 ono + postage for those unable to pickup.

Condition: Worked last time I had it with my Pioneer headunit, but the headunit itself jammed up on CD function and so I bought a new headunit that wasn't Pioneer.

Location: Ashgrove, QLD, 4060

Contact: [email protected] or 0401 443 980 begin_of_the_skype_highlighting 0401 443 980 end_of_the_skype_highlighting

Pictures:

IMG_0285.jpg

More information:

http://www.pioneer.com.au/Products/Car%20E...IB100%20II.aspx

http://www.modyourcar.com.au/pioneer-ipod-...cdib100ii-p4913

Link to comment
https://www.sau.com.au/forums/topic/322174-pioneer-ipod-adaptor/
Share on other sites



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...