Jump to content
SAU Community

Recommended Posts

Hi,

We have a few spots left if any one is keen to come and learn the basics. Sorry about the short notice, its on this weekend, Sat 12th june at Queensland Raceway. This is a day for thoes ppl who want to learn from scratch, even if you have never tried before and have no real idea, this is the place to start. We will be covering the very basic, from Iniating a slide and how to control what comes next. The area we will be using is in the car park where the go-carts used to be, so there is no gutters or barriers to hit. No big speed stuff, just slow and gentle on a wet skidpan.

Entry forms can be found here\/ \/ \/

http://www.trackattack.com.au/2010/index.p...&Itemid=219

Get in quick as it is on this weekend, 12th June.

cost is $100 and is limited to 10 spots so there is plenty of 1 on 1 time. There is a friday night open practice night which we will be at aswell, always good for a look see.

Link to comment
https://www.sau.com.au/forums/topic/323894-drift-school/
Share on other sites

Hi,

We have a few spots left if any one is keen to come and learn the basics. Sorry about the short notice, its on this weekend, Sat 12th june at Queensland Raceway. This is a day for thoes ppl who want to learn from scratch, even if you have never tried before and have no real idea, this is the place to start. We will be covering the very basic, from Iniating a slide and how to control what comes next. The area we will be using is in the car park where the go-carts used to be, so there is no gutters or barriers to hit. No big speed stuff, just slow and gentle on a wet skidpan.

Entry forms can be found here\/ \/ \/

http://www.trackattack.com.au/2010/index.p...&Itemid=219

Get in quick as it is on this weekend, 12th June.

cost is $100 and is limited to 10 spots so there is plenty of 1 on 1 time. There is a friday night open practice night which we will be at aswell, always good for a look see.

definatly keen but will be waiting to get my coilovers will book in down the track asap..

Link to comment
https://www.sau.com.au/forums/topic/323894-drift-school/#findComment-5284098
Share on other sites

We had our first beginners drift school at Queensland Raceway last weekend. It went pretty well I think. The link is to the course setup at the end of the day that used all the skills learnt. The old Falcon is setup for Targa type events. Unfortunately with such little lock it was tricky to drive. It took a while but he eventually got the hang of a donut.

http://www.youtube.com/trackattackau#p/u/0/7ZirR4clni0

The next 1 is booked for Sept 5. All you need to enter is a helmet and longs (pants and sleeves). An AASA lic is also needed. to book a spot, go to the link below:

http://www.trackattack.com.au/2010/index.p...&Itemid=219

Edited by Noddy
Link to comment
https://www.sau.com.au/forums/topic/323894-drift-school/#findComment-5296433
Share on other sites

We had our first beginners drift school at Queensland Raceway last weekend. It went pretty well I think. The link is to the course setup at the end of the day that used all the skills learnt. The old Falcon is setup for Targa type events. Unfortunately with such little lock it was tricky to drive. It took a while but he eventually got the hang of a donut.

http://www.youtube.com/trackattackau#p/u/0/7ZirR4clni0

The next 1 is booked for Sept 5. All you need to enter is a helmet and longs (pants and sleeves). An AASA lic is also needed. to book a spot, go to the link below:

http://www.trackattack.com.au/2010/index.p...&Itemid=219

hey Noddy just wondering how i get a AASA licence.. cheers

Link to comment
https://www.sau.com.au/forums/topic/323894-drift-school/#findComment-5298764
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...