Jump to content
SAU Community

Recommended Posts

s15 eyelids $30

s15 washer bottle $20

s15 overflow bottle $20

s15 parcel shelf $20

s15 dual gauge pillar brand new $90

s15 genuine veilside rear bar painted blue $50

s14 sr20det long motor missing a few things suits rebuild $200

s13 180sx turbo back exhuast 3 inch $100

-4 fittings 180deg and 90deg $10ea or $40 for the lot i think theres roughly 8 fittings

-10 braided line 40cm and 30cm $20 the lot

brand new td05 oil drains x 2 $10 ea

2 x greddy td05h-18g cartridges require rebuild wheels are fine $25 for both

2 inch striaght silicone hose brand new will also throw in 4 assorted hoses as well $30

3 inch straight alloy pipe $15

s15 rear brake light $10

qld personlised plates 314 hfo (1 slimline 1 standard) $30

skyline radiator mounts with rubber $10

rb26 aftermarket o2 sensor adapters $10

rb26 pistons $60

rb26 sump baffles $30

rb26 brand new genuine nissan dump pipe gaskets $20

rb26 manifold-turbo gaskets $10

rb26 oil pressure sender $10

rb26 air con pump $50

5 inch canon $20

4 inch canon $20

4 inch canon with 2 bolt flange $50

car cover protects from snow hail rain and sun suits sports cars such as s15 s14 s13 r32 r33 r34 ect... $30

located on the gold coast

brad 0421511710

sms or pm for pics

Edited by toy515

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...