Jump to content
SAU Community

Flexible Window Washer Bag

Sean W

By Sean W,
in Wanted to Buy

 Share

Recommended Posts

Sean W Experienced

Sean W

Posted
Posted

Hey guys,

Front facing plenum means i now no longer have the standard window washer bottle in my R33. im after the little bag that can be used to replace the big plastic bottle

>>> or any info on where to source one <<<

i know the silver F&E automotive GTR has one but i dont know where to source one.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/325524-flexible-window-washer-bag/
Share on other sites
partyboy73 Rising Star

partyboy73

Posted
Posted

Hey Matt we both found one... Nice Products stock them but you'll need to check out their site to see the nearest retailer to you. Stock number: NWK901 and you should pay about $30

.WILKO. Rising Star

.WILKO.

Posted
Posted
Hey Matt we both found one... Nice Products stock them but you'll need to check out their site to see the nearest retailer to you. Stock number: NWK901 and you should pay about $30

where in south aus could i get one i am also in this situation after installion of my plazmaman

  • 3 weeks later...
Sean W Experienced

Sean W

Posted
  • Author
Posted

finally got around to installing mine, got the same one as partyboy, the NWK901 from norwood auto spares. delivered to sydney in under a week for 45 bucks all up.

(http://www.derek.com.au/washer.html if anyone else wants one)

really easy to install, about an hour of tinkering. the bracket they supplied i screwed to the fuse cover so the bag pretty much hangs in the position where the original plastic bottle would be. this kit comes with one plug and pair of wires so remember to splice it and connect it to both the nissan plugs if you have a rear window washer and want it to work from this bag as well.

cheap defect insurance, or in my case; cheap fix after a defect!

  • 11 months later...
N-DAWG Mentor

N-DAWG

Posted
Posted

Sorry to bump an old thread... was just wondering if you could explain how you wired up the pump in this kit to the factory OEM wiring.

I received mine late last week. The kit has a +/- Wire system, but Nissan Plugs iirc on the R34 have Three Wires. Did you just simply connect the single pump on the washer bug to the two sets of OEM wires in Parallel on just the + and - wires?

Thanks in advance

Nathan

Edit: Just realised this post was originally in a WTB thread.. mods let me know if I need to start a new topic elsewhere. Cheers

finally got around to installing mine, got the same one as partyboy, the NWK901 from norwood auto spares. delivered to sydney in under a week for 45 bucks all up.

(http://www.derek.com.au/washer.html if anyone else wants one)

really easy to install, about an hour of tinkering. the bracket they supplied i screwed to the fuse cover so the bag pretty much hangs in the position where the original plastic bottle would be. this kit comes with one plug and pair of wires so remember to splice it and connect it to both the nissan plugs if you have a rear window washer and want it to work from this bag as well.

cheap defect insurance, or in my case; cheap fix after a defect!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Did tie rods. Steering now not "springing" back.

      By GTSBoy · Posted

      No. GKTech arms have spherical bearings in them. No bushes. You will not need bushes for those arms. The sphericals are a bit of a maintenance nightmare. I have replaced all of mine several times in the 5 or so years I've had them, and I have the arms out regularly to clean and lube the balls. Worth the pain on an R32, because the standard arm design is trash. If you need the camber adjustment, there are other options (than the GKTech ones), although I would still lean towards and prefer the GKTech ones, even with the maintenance load of the sphericals. The caster adjustment is also highly valuable, allowing for setting the car up to drive straight. There are a million options for these, including the GKTech ones. I've had Tein rods on mine for 20 years and the balls are much less trouble in that location. Never given me a moment's pain. All positives, no negatives. I consider them compulsory.
    • Kaptain
      R33 general questions

      By Kaptain · Posted

      Lol yeah I ordered the clips mentioned and as far as the amayama diagrams go i think thats all I'll need. Fogured id ask, sometimes people's first hand experience doesnt always match up to diagrams haha, i guess I'll wing it and worse comes to worse I'll just deal with it as I go
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Thanks for all that information I appreciate it. To answer your questions: - Yep that's what I mean. These guys are professional painters to so I must be missing something. It's a bit hard to explain. - With the primer landing on clearcoat, I make sure that the surrounding clearcoat is scuffed to 240 grit as my epoxy primer says that I only need to sand the area to 240 grit. - Yeah so similar to the first question, assuming that the paint landed on the unscuffed clearcoat because I've seen that happen. - Yep I want to prep the surface in that order. Only reason because epoxy primer will protect it from rust and I need that atm with this crappy Sydney weather. I think I was worried about time, if I try to put the filler down but screw it up somehow and I don't have time to sand it off and reapply it then need to put primer later that it might start to rust again so I wanted to apply the primer as quick as possible to not deal with rust.  - I just deleted some answers, I just realised after watching a video and what you said about looking at the data sheet, that I need to read the data sheet on the specific filler I'm using. It's possible now that I put epoxy primer first was a waste of time and need to go to bare metal lol
    • silviaz
      Did tie rods. Steering now not "springing" back.

      By silviaz · Posted

      I did. I went to a suspension guy and he told me because I don't have adjustable camber arms it's the reason why my car veers towards the left if I take my hands off the wheel but if I drive my other every day car and take my hands off the steering wheel it goes completely straight. I think it's common with Skyline's. In order to fix the problem, I likely need gktech camber arms then nismo bushes since I have poly bushes atm, then a wheel alignment after that. With my car if I take my hands off the steering wheel on a really bumpy road before stopping at a light I have to hold my steering wheel somewhat tight otherwise my car will legit just go completely in the other direction quite quickly and I'll slam into something lol instead of stopping straight. I Believe this YouTuber had the same issue and fixed it with gktech arms. At timestmap 6:05 he talks about how the car doesn't veer anymore after installing these arms.  
    • itsforandres
      BCNR33 Blower Motor Resistor - Testing

      By itsforandres · Posted

      hello! does anyone have a schematic that shows how to test the blower motor resistor for the vac system? i believe the part# is 27761-15U00. I think the resistor is toast, but would like to be able to test it somehow before i embark on the journey to find a new one. cheers! 27761-15U00
×
×
  • Create New...