Jump to content
SAU Community

Recommended Posts

Hey guys,

Front facing plenum means i now no longer have the standard window washer bottle in my R33. im after the little bag that can be used to replace the big plastic bottle

>>> or any info on where to source one <<<

i know the silver F&E automotive GTR has one but i dont know where to source one.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/325524-flexible-window-washer-bag/
Share on other sites

Hey Matt we both found one... Nice Products stock them but you'll need to check out their site to see the nearest retailer to you. Stock number: NWK901 and you should pay about $30

Hey Matt we both found one... Nice Products stock them but you'll need to check out their site to see the nearest retailer to you. Stock number: NWK901 and you should pay about $30

where in south aus could i get one i am also in this situation after installion of my plazmaman

  • 3 weeks later...

finally got around to installing mine, got the same one as partyboy, the NWK901 from norwood auto spares. delivered to sydney in under a week for 45 bucks all up.

(http://www.derek.com.au/washer.html if anyone else wants one)

really easy to install, about an hour of tinkering. the bracket they supplied i screwed to the fuse cover so the bag pretty much hangs in the position where the original plastic bottle would be. this kit comes with one plug and pair of wires so remember to splice it and connect it to both the nissan plugs if you have a rear window washer and want it to work from this bag as well.

cheap defect insurance, or in my case; cheap fix after a defect!

  • 11 months later...

Sorry to bump an old thread... was just wondering if you could explain how you wired up the pump in this kit to the factory OEM wiring.

I received mine late last week. The kit has a +/- Wire system, but Nissan Plugs iirc on the R34 have Three Wires. Did you just simply connect the single pump on the washer bug to the two sets of OEM wires in Parallel on just the + and - wires?

Thanks in advance

Nathan

Edit: Just realised this post was originally in a WTB thread.. mods let me know if I need to start a new topic elsewhere. Cheers

finally got around to installing mine, got the same one as partyboy, the NWK901 from norwood auto spares. delivered to sydney in under a week for 45 bucks all up.

(http://www.derek.com.au/washer.html if anyone else wants one)

really easy to install, about an hour of tinkering. the bracket they supplied i screwed to the fuse cover so the bag pretty much hangs in the position where the original plastic bottle would be. this kit comes with one plug and pair of wires so remember to splice it and connect it to both the nissan plugs if you have a rear window washer and want it to work from this bag as well.

cheap defect insurance, or in my case; cheap fix after a defect!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...