Jump to content
SAU Community

Recommended Posts

hey guys i have just spun a bearing in the gtr,

SOOOOO...

im going to put my 26/30 in it now :/ .

which means i have some goodies forsale 4 all you guys and gals :D .

1month old(lessthan 1000ks) garrett 2860-7s $2000

r32 Apexi pod filter kit with standard afm's $400ono

full r32 engine cover set (cams,coil,timing) awesome condition $400

r32 gtr drivers side seat. tiny tears(from keys) barely noticeable $300ono

standard r32 gtr steering wheel good condition but some wear. $150

full set (accept drivers) r32 gtr genuine nissan floor mats $150??? not sure

full set of r32 gtr injectors (reco'd about 10k ago) with standard rail $300ono

r32 gtr front bar with lip and factory n1 vents.. (lip has seen better days but bar is in good condition)

it is blue in colour $450

also maybe full late model (1993) r32 gtr rb26 long engine with spun big end includes everything except turbos and injectors $2250

if your interested in anything call me 0432227592

my name is chris.. thanks

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/
Share on other sites

dont know about this guy im still wating on a ecu he sold me, its been 3 weeks and he only live on the gold coast and i live on the sunshine coast.

Go play him a visit, its not that far.

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5317113
Share on other sites

i have explained what happened to chris..

it was MY f**kup originally and now is being delivered by a different company..

i work for nissan in SOUTHPORT... CALL 55562900 and ask my receptionist for chris!!!

work ADDRESS IS 7-9 EXPO COURT SOUTHPORT... VON BIBRA AUTO VILLAGE (NISSAN) come and see me if you feel it is necessary..

nothing dodgy going on here but i cant help the TNT delivery company deliver any quicker than they are..

i didnt sort the ISSUE out till thursday. so give it till tomorrow or wednesday at the latest and if you have not got it by then i will refund you all of your cash and you can still keep the ecu!!

i have SENT IT... so i do appologise for the inconvenience but it is now out of my hands..

i have sold plenty of stuff on this forum and have never had a problem with anyone so i do appologise.

i hope that dispells any feelings of distrust and i can get on with selling my other parts.. :cool:

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5317400
Share on other sites

on another note,

i will also be selling the exhaust of the car as i am a fabricator by trade and i will be making a twin system for myself..

it is a kakimoto system with no cat. it is a full exhaust from the dump pipes to the tip, the rear muffler is completely ploished and it had another muffler in the center, was very quiet but has a nice note...

$500

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5317557
Share on other sites

dont know about this guy im still wating on a ecu he sold me, its been 3 weeks and he only live on the gold coast and i live on the sunshine coast.

Its all good. Chris is a real good guy, we have sorted out the problem (TNT) have no worries with buying anything off him. Thanks again Chris

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5321147
Share on other sites

yeah mate i have 2..

i also have a full, standard r32 gtr head in VERY good condition still on a motor for sale....

and a power fc for r32/33 gtr with no hand controller... tuned by ben at racepace... very well done,

good maps and an easy 270kw at 7000rpm with 18psi of boost....

and i will do a good deal for anyone who takes more than one item.

thanks,

chris

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5325651
Share on other sites

i have had some HALF decent offers but no one has come through with any funds as yet..

i am also keen to trade for AFTERMARKET RB26 INTERNALS...

let me know what you have.

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5327737
Share on other sites

Ive got a set of H-beam AttakD conrods fitted to 87mm HKS pistons with ACL rod bearings.

used for under 500kms with a run-in tune before engine was restripped, in excellent condition.

plus brand new in box ACL Race main/thrust bearing kit plus brand new in box ARP main stud set

I would swap for the garret turbo's...

cost me over 2g for these brand name pistons/rods/bearings/studs

PM me if interested

Link to comment
https://www.sau.com.au/forums/topic/326570-rb26-goodies/#findComment-5328112
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
×
×
  • Create New...