Jump to content
SAU Community

Running Like Shit!

roniboi

By roniboi,
in General Maintenance

 Share

Recommended Posts

roniboi Rookie

roniboi

Posted
Posted

Hi all

wanting to know if any1 has any idea Wat is up with my goddy , ???

1st of all i recently had problems with my turbos e.g white smoke pouring out exhaust and oil all threw my inter cooler pipes, i went to c.n.j motor sport up in Underwood and they said the turbos r fine but i have since found out that they are not fine and i have done a oil seal ..... anyway i have just gathered up enuf money to send it to Godzilla motor sport as i have heard good things about them can any1 confirm that ?? its going in for new turbos and tune etc ..... now here's the big but :) i started the car up which was running fine even tho turbos r no good and it seems to be now dropping a cylinder or 2 does any1 have any ideas as to y its running like that now when it wasn't even after the turbos went ages ago????

any help would be great thanks

Link to comment
https://www.sau.com.au/forums/topic/328000-running-like-shit/
Share on other sites
roniboi Rookie

roniboi

Posted
  • Author
Posted
You said you had oil in your intercooler pipes, my guess would be that the oil in the intake has fouled up your spark plugs. possible quick fix is to pull ur plugs out and give them a clean

Thanks heaps for that might thought that might be the problem I wil get them to do it at shop..do u know anything bout Godzilla Motorsport??

nismo32gtr Enthusiast

nismo32gtr

Posted
Posted
Thanks heaps for that might thought that might be the problem I wil get them to do it at shop..do u know anything bout Godzilla Motorsport??

Ive never been there but i have heard some very good things about them , and seen some very tough engines come out of there

roniboi Rookie

roniboi

Posted
  • Author
Posted
sweet as hopefully they will be building one more :yes: thanks for ur help

Hey me again

found out today its my bottom end that needs rebuilding so wanting some advice as to wat parts to throw back in as i want a good strong engine thats good for 650hp-700hp, just trying to suss out how much parts for bottom end would roughley be before i go buying up .....

any help please ??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      Stagea Front CV Axle Question

      By Duncan · Posted

      I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • soviet_merlin
      Stagea Front CV Axle Question

      By soviet_merlin · Posted

      One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • S1_C34
      Stagea Front CV Axle Question

      By S1_C34 · Posted

      I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Nightmare_mistress_R33
      CD009 RB Conversion

      By Nightmare_mistress_R33 · Posted

      Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...