Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just decided to try and clean out my garage in hope of fitting a car back in there one of these days. Below are pictures of each of the items; feel free to ask any questions. I can be contacted via PM, I'm on here most days and will generally reply fairly quickly. Feel free to make offers, you never know!

R33 Genuine Nissan Underbody Plastic - First one i've seen - $40

R33 Standard Front and Rear Swaybars (with rubbers) - $40 for both or $25 each

R33 Open 6 Bolt R200 Diff (4.11 Ratio) - $60

R33 Drive Shafts (6 Bolt to suit above diff) - $40 for both

R33 Washer Bottle (unsure if motors work) - $15

R33 Series 2 Passenger Light (needs to be resealed, cover was taken off for cleaning. Plastic cover has small crack, not visible from front.) - $80

Apexi Boost Gauge 60mm (Fake?) - $30

R33 Stock Suspension Front and Rear (Average Condition) - $50 for all of it

Diff Back Exhaust (Good for Compliance) - $40

R33 Standard Dump / Front Pipe - $30

Standard RB25DET Cams - $40

R33 Maroon Boot Lid (No Spoiler, Lock or Hinges) - $30

T Sport Boost Gauge 52mm (All wiring and boost line Included) - $40

R33 Series 1 Manual ECU - $60

6 x R33 Series 2 Coilpacks (All working when removed) - $80

Pod filter Adaptor (Suit Standard afm?) - $15

Custom PWR Radiator (Thick core, looks mint) - $450

Decided to stick with my standard radiator. Side panels make it easy to mount. Comes with Thermo Fan as shown in pictures. Dimensions of the Radiator are 400 High, 550 Wide to Sidetanks, 700 Wide to Panels and around 60 Thick as pictured.

All of the parts can be picked up from the Gold Coast (Robina Area) or I can post at buyers expense.

Mic

post-57177-1280148390_thumb.jpg

post-57177-1280148440_thumb.jpg

post-57177-1280148460_thumb.jpg

post-57177-1280148469_thumb.jpg

post-57177-1280148483_thumb.jpg

post-57177-1280148497_thumb.jpg

post-57177-1280148511_thumb.jpg

post-57177-1280148526_thumb.jpg

post-57177-1280148541_thumb.jpg

post-57177-1280148557_thumb.jpg

post-57177-1280148570_thumb.jpg

post-57177-1280148587_thumb.jpg

post-57177-1280148604_thumb.jpg

post-57177-1280148618_thumb.jpg

post-57177-1280148632_thumb.jpg

post-57177-1280148646_thumb.jpg

post-57177-1280148657_thumb.jpg

post-57177-1280148667_thumb.jpg

post-57177-1280148681_thumb.jpg

post-57177-1280148692_thumb.jpg

post-57177-1280148705_thumb.jpg

post-57177-1280148722_thumb.jpg

post-57177-1280148733_thumb.jpg

post-57177-1280148745_thumb.jpg

post-57177-1280148760_thumb.jpg

post-57177-1280148777_thumb.jpg

post-57177-1280148791_thumb.jpg

post-57177-1280148806_thumb.jpg

post-57177-1280148820_thumb.jpg

post-57177-1280148832_thumb.jpg

post-57177-1280148845_thumb.jpg

Edited by Binofski
can you tell me what the thing in the middle of the right hand side end tank of the radiator is? is it a sensor mount or something? and how much use has it had?

The thing in the middle of the right hand side is just another barb which could be used as a spot for a sensor, or simply left with the rubber bung on it. I've attached some pics to give you a better look at it. It was used by the original owner for a few dyno runs while he was tuning, but he replaced it with a thinner saber one which suited him better. So I would say a few weeks use max. Thing comes up like a mirror after a polish.

Mic

post-57177-1280185211_thumb.jpg

post-57177-1280185232_thumb.jpg

Edited by Binofski
  • 2 weeks later...
ill buy the headlight if u can put the cover on for me?

Hey Mate,

I'll take a look at it today and ill get back to you about it. Gotta see if I have sikaflex to put it back together with.

Mic

  • 4 weeks later...
  • 2 weeks later...

Bump

Also for sale Splitfire coilpacks to suit series 2 RB25DET - $400

Headlight is still here, as is PWR radiator

Apexi Boost Gauge now sold.

Cheers,

Mic

Edited by Binofski
Hey Guys,

Just decided to try and clean out my garage in hope of fitting a car back in there one of these days. Below are pictures of each of the items; feel free to ask any questions. I can be contacted via PM, I'm on here most days and will generally reply fairly quickly. Feel free to make offers, you never know!

R33 Genuine Nissan Underbody Plastic - First one i've seen - $40

R33 Standard Front and Rear Swaybars (with rubbers) - $40 for both or $25 each

R33 Open 6 Bolt R200 Diff (4.11 Ratio) - $60

R33 Drive Shafts (6 Bolt to suit above diff) - $40 for both

R33 Washer Bottle (unsure if motors work) - $15

R33 Series 2 Passenger Light (needs to be resealed, cover was taken off for cleaning. Plastic cover has small crack, not visible from front.) - SOLD SOLD SOLD

Apexi Boost Gauge 60mm (Fake?) - SOLD SOLD SOLD

R33 Stock Suspension Front and Rear (Average Condition) - $50 for all of it

Diff Back Exhaust (Good for Compliance) - $40

R33 Standard Dump / Front Pipe - $30

Standard RB25DET Cams - $40

R33 Maroon Boot Lid (No Spoiler, Lock or Hinges) - $30

T Sport Boost Gauge 52mm (All wiring and boost line Included) - $40

R33 Series 1 Manual ECU - SOLD SOLD SOLD

6 x R33 Series 2 Coilpacks (All working when removed) - $80 - Still HERE!

Pod filter Adaptor (Suit Standard afm?) - SOLD SOLD SOLD

Custom PWR Radiator (Thick core, looks mint) - $450

Decided to stick with my standard radiator. Side panels make it easy to mount. Comes with Thermo Fan as shown in pictures. Dimensions of the Radiator are 400 High, 550 Wide to Sidetanks, 700 Wide to Panels and around 60 Thick as pictured.

All of the parts can be picked up from the Gold Coast (Robina Area) or I can post at buyers expense.

Mic

Series 2 Splitfire Coilpacks - $400 in original Box!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...