Jump to content
SAU Community

Recommended Posts

Hey guys, needing some advice on a leak i've got at the moment on my 32.

I noticed it yesterday when i saw coolant running along my driveway, its not leaking alot but enough. Fairly sure its only leaking while the engine is on.

It is coming from the back of the engine bay somewhere behind the motor, and running down onto the passenger side of my gearbox.

I have pulled off the two heater hoses behind the engine to check them properly and replaced clamps even though they were all fine.

Now im stuck, its obviously got to be something lower than those hoses, is there any more hoses etc underneath those i should look for as its nearly impossible to get down there.

Any help would be great,

Cheers

Steve

Link to comment
https://www.sau.com.au/forums/topic/330454-rb25-coolant-leak-problem/
Share on other sites

could be the turbo water hose, under neath the intake there is a 'L' bend near the stater motor! it happemed to me on my rb25det it was a pin hole and it would squirt up on top of the gear box and run down the passanger side

hey mate, i had a problem with a coolent hose leaking bihind the motor.. (i have an Rb25 in my R32 aswell) you could just see it squirting outta a pin hole!. i could not reach iit by hand at all..

how i fixed it was.. taking starter motor off! pretty easy 2 or 3 bolts, then with one hand sliced the busted hose off. then bought some new Heavy duty hose from gibs trucks and 2 new hose clams. and with only one harm fitted it all up! took some time.. but was easyer then taking off the inlet manifold!

hope this helps!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...