Jump to content
SAU Community

FS: Nismo R33 GTST engine mount NEW

PSIKO
 Share

Recommended Posts

PSIKO Mentor

PSIKO

Posted
Posted

Torque-side Nismo R33 GTST engine mount

30-40% stiffer than standard worn-out engine mounts

less motor shake during idle and reduced engine movement during (ab)use

Brand new still in box, with instructions and what-not

nismoem33gtst.jpg

Am in Perth

$180

Link to comment
https://www.sau.com.au/forums/topic/33156-fs-nismo-r33-gtst-engine-mount-new/
Share on other sites
PSIKO Mentor

PSIKO

Posted
  • Author
Posted

yep, but not fully out

you can undo the 4 bolts underneath (2 on each engine mount) and lift the engine up very slightly (with intercooler piping etc still connected) and the mounts can be put in from underneath

Cheers :)

  • 4 months later...
rs73 Grand Master

rs73

Posted
Posted
No there isn't aaaannd no there isn't :D

The Nismo box catered for just one engine mount so would have come with only one from Nismo

Was traded for r32 one a while back anyway so SOLD :)

No worries then. thought u still have it ;) I saw the online catalogue from Greenline and I think it says a set of 2. Must be a typo or something.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
×
×
  • Create New...