Jump to content
SAU Community

Recommended Posts

Hey. Just wondering if my clutch might be going shortly or not? It squeaks most times and the release point in the pedal is very high.

Anything to worry about?

Also can someone post a link to the thread about the air con control lights and how to change them please? I cant seem to find it (even through search bar).

Link to comment
https://www.sau.com.au/forums/topic/331946-squeaking-clutch/
Share on other sites

if it squeaks when you push the pedal in then it could be 1 of 2 issues. 1 is the bracket where the pedal mounts under they dash. the other is the pivot bolt inside the gearbox. the first issue is the easiest to check and fix. the second is relatively easy to check, but much harder to fix as the gearbox has to come out

if the pivot bolt is damaged in anyway then the next time you press the clutch pedal may be the last before it gives out and you lose all use of the clutch. when mine broke i pushed the clutch in and it felt funny, so i let it up and did it again. it still felt funny. i let my foot up and the pedal got nearly all the way back out before it shot to the floor. i could pull it back up by hand but the clutch didn't work.

I had the same issue on my old R33. It was the clutch fork which needed to be lubricated.

Squeaky when pressing and releasing, very annoying. Grabbed a can of motorbike chain grease and sprayed in the plastic flap where the fork is located. Annoying problem solved and cost me $6 to fix =)

  • 1 month later...

bunny-thread-relevant-to-my-interests.jpg

if it squeaks when you push the pedal in then it could be 1 of 2 issues. 1 is the bracket where the pedal mounts under they dash. the other is the pivot bolt inside the gearbox. the first issue is the easiest to check and fix. the second is relatively easy to check, but much harder to fix as the gearbox has to come out

Mine has a squeaking sound audible from outside the car, which isn't all to audible for me but I don't like it being there :P

I'm assuming it's the pivot bolt. Where abouts should I look for that and do I need to take the gearbox out to greese it up?

you can fix the squeaking pivot bolt without removing the gearbox. you simply spray something like a spray grease in through the opening around where the clutch fork goes into the gearbox.

WD40 sounds like it'll do the trick :P

I had a mechanic do that on my Excel once but the squeaking soon redeveloped.

Is a lack of lubricant the only thing causing the squeak?

yeah it is. also wd40 is too thin, so the noise will come back after a few weeks/months. something thicker like a spray grease, motorbike chain lube, or even just a blob of grease on the end of a long screw driver (and then a small piece of wire to work it into the right area) will be better than wd40. wd40 isn't really a very good lubricant.

yeah it is. also wd40 is too thin, so the noise will come back after a few weeks/months. something thicker like a spray grease, motorbike chain lube, or even just a blob of grease on the end of a long screw driver (and then a small piece of wire to work it into the right area) will be better than wd40. wd40 isn't really a very good lubricant.

Any specific type of lube you recommend? I'll pop into supercheap or something on the way home.

  • 1 month later...
if you go to advanced search and search for posts about the pivot bolt and my name you'll find a pic i posted about it

Thanks Hugh. I haven't had a chance to do it recently, and I went to do it the other night and it wouldn't make the sound (it's a bit hard to work out where the sounds coming from when the sound isn't being made :whistling: )

If I get home by a reasonable hour tonight, I'll have a look...

For future Googlers

here is the picture. the pivot bolt is about 2 inches in behind that soft bit.

the picture is taken from the drivers side. if you stick your head under the car just behind the front wheel that is what you'll see.

post-70785-1291067039_thumb.jpg

Edited by SKITTLES
Thanks Hugh. I haven't had a chance to do it recently, and I went to do it the other night and it wouldn't make the sound (it's a bit hard to work out where the sounds coming from when the sound isn't being made :blink: )

If I get home by a reasonable hour tonight, I'll have a look...

For future Googlers

Further noting, it's on the drivers side of the gearbox, there's a medium, square rubber grommet... just pull it out on one side and move it out of the way.

I sprayed some WD40 in and it fixed it.. but give it a week and it'll come back..

What part in particular am I supposed to lube??

What should I be straining to look for? I can only really see a black single bolt.

you should see the clutch fork sitting on that bolt. that bolt has a mushroom shaped head on it and the clutch fork pivots on that. you need to lube up the top of the pivot bolt. you just have to spray a heap of lube onto the area and then continuously push on the clutch to work it into where it needs to be

  • 3 weeks later...
  • 4 months later...

sorry to dig up and old thread but im a little confused.

My clutch squeaks when i press and release it and im trying to diagnose why.

I'm looking under the dash to find the bracket that may] need greasing up but im not sure where exactly i should be greasing.

post-82442-0-51532500-1305540476_thumb.jpg

where should i be lubricating??

any help would be greatly appreciated!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...