Jump to content
SAU Community

Recommended Posts

Hey. Just wondering if my clutch might be going shortly or not? It squeaks most times and the release point in the pedal is very high.

Anything to worry about?

Also can someone post a link to the thread about the air con control lights and how to change them please? I cant seem to find it (even through search bar).

Link to comment
https://www.sau.com.au/forums/topic/331946-squeaking-clutch/
Share on other sites

if it squeaks when you push the pedal in then it could be 1 of 2 issues. 1 is the bracket where the pedal mounts under they dash. the other is the pivot bolt inside the gearbox. the first issue is the easiest to check and fix. the second is relatively easy to check, but much harder to fix as the gearbox has to come out

if the pivot bolt is damaged in anyway then the next time you press the clutch pedal may be the last before it gives out and you lose all use of the clutch. when mine broke i pushed the clutch in and it felt funny, so i let it up and did it again. it still felt funny. i let my foot up and the pedal got nearly all the way back out before it shot to the floor. i could pull it back up by hand but the clutch didn't work.

I had the same issue on my old R33. It was the clutch fork which needed to be lubricated.

Squeaky when pressing and releasing, very annoying. Grabbed a can of motorbike chain grease and sprayed in the plastic flap where the fork is located. Annoying problem solved and cost me $6 to fix =)

  • 1 month later...

bunny-thread-relevant-to-my-interests.jpg

if it squeaks when you push the pedal in then it could be 1 of 2 issues. 1 is the bracket where the pedal mounts under they dash. the other is the pivot bolt inside the gearbox. the first issue is the easiest to check and fix. the second is relatively easy to check, but much harder to fix as the gearbox has to come out

Mine has a squeaking sound audible from outside the car, which isn't all to audible for me but I don't like it being there :P

I'm assuming it's the pivot bolt. Where abouts should I look for that and do I need to take the gearbox out to greese it up?

you can fix the squeaking pivot bolt without removing the gearbox. you simply spray something like a spray grease in through the opening around where the clutch fork goes into the gearbox.

WD40 sounds like it'll do the trick :P

I had a mechanic do that on my Excel once but the squeaking soon redeveloped.

Is a lack of lubricant the only thing causing the squeak?

yeah it is. also wd40 is too thin, so the noise will come back after a few weeks/months. something thicker like a spray grease, motorbike chain lube, or even just a blob of grease on the end of a long screw driver (and then a small piece of wire to work it into the right area) will be better than wd40. wd40 isn't really a very good lubricant.

yeah it is. also wd40 is too thin, so the noise will come back after a few weeks/months. something thicker like a spray grease, motorbike chain lube, or even just a blob of grease on the end of a long screw driver (and then a small piece of wire to work it into the right area) will be better than wd40. wd40 isn't really a very good lubricant.

Any specific type of lube you recommend? I'll pop into supercheap or something on the way home.

  • 1 month later...
if you go to advanced search and search for posts about the pivot bolt and my name you'll find a pic i posted about it

Thanks Hugh. I haven't had a chance to do it recently, and I went to do it the other night and it wouldn't make the sound (it's a bit hard to work out where the sounds coming from when the sound isn't being made :whistling: )

If I get home by a reasonable hour tonight, I'll have a look...

For future Googlers

here is the picture. the pivot bolt is about 2 inches in behind that soft bit.

the picture is taken from the drivers side. if you stick your head under the car just behind the front wheel that is what you'll see.

post-70785-1291067039_thumb.jpg

Edited by SKITTLES
Thanks Hugh. I haven't had a chance to do it recently, and I went to do it the other night and it wouldn't make the sound (it's a bit hard to work out where the sounds coming from when the sound isn't being made :blink: )

If I get home by a reasonable hour tonight, I'll have a look...

For future Googlers

Further noting, it's on the drivers side of the gearbox, there's a medium, square rubber grommet... just pull it out on one side and move it out of the way.

I sprayed some WD40 in and it fixed it.. but give it a week and it'll come back..

What part in particular am I supposed to lube??

What should I be straining to look for? I can only really see a black single bolt.

you should see the clutch fork sitting on that bolt. that bolt has a mushroom shaped head on it and the clutch fork pivots on that. you need to lube up the top of the pivot bolt. you just have to spray a heap of lube onto the area and then continuously push on the clutch to work it into where it needs to be

  • 3 weeks later...
  • 4 months later...

sorry to dig up and old thread but im a little confused.

My clutch squeaks when i press and release it and im trying to diagnose why.

I'm looking under the dash to find the bracket that may] need greasing up but im not sure where exactly i should be greasing.

post-82442-0-51532500-1305540476_thumb.jpg

where should i be lubricating??

any help would be greatly appreciated!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...