Jump to content
SAU Community

Recommended Posts

r32 drivers side guard in primer ready for paint, perfect condition has all the mounting points

$ 90 or nearest offer MAKE A F*CKING OFFER

33mxwzm.jpg

r32 front strut brace, in good condition, used only once on a car for like 200 km if that then the car was stripped

$120 ono MAKE AN OFFER NEED IT GONE!

2zzq9vb.jpg

r32 cluster surround, manual type m in good condition all mounting points are there

not sure what they re worth but i know they re always cracking $120 ono THROW US AN OFFER now $90!

34s48jc.jpg

r32 cluster surround, auto type m in good condition all mountin points are there and not broken

$80 ono THROW AN OFFER now $50!

r32 drivers side indicator, clear and maber, has crack 30 posted

acen85.jpg

180sx rear reo bar, in perfect condition $70

dxipub.jpg

hey guys

up for sale are front pair of type m seats out of a r32, they are reclinable, bolt straight into s13, very good condition, no rips or tears they just need a clean

has 3 adjustable knobs, so it hugs you, the bottom half can move up and down, gangster...

$200 ono, throw us an offer

2el5dhx.jpg

pick up only, dicks to postage

pick up from western suburbs melbourne

pm if interested

or call 0413 926 794

apexi rear strut brace for s13/180sx, has been on my stationary car and thats it so it hasnt been used for driving purposes yet, carbon fibre finish and anodised red bracing $150 ono pretty much brand new condition

dsc04537g.th.jpg

stainless steel manifold for sr20det blacktop and redtop

has flange for external gate

in brand new condition has not been used

have been told flange is t3/t4 but not 100% sure

$300 ono i will post, offer me a price MAKE OFFERS FOR THIS ITEM NEED IT GONE

dsc04450y.th.jpg

dsc04448e.th.jpg

up for sale is a set o toe arms i purchased off pnk180 a while back

in good nick and in working order, have no use for them

toe arms in very good nick with good bushes also unknown brand

anyway here are some pictures

170 DELIVERED MAKE OFFERS

1zr2yb7.jpg

up for sale are my cams,was in a redtop, he had it in there for 2000km if that until he copped a defect and epa and i bought the motor

these are the REVISED VERSION and they have bigger lift than normal step 1s I.E THEY COST MORE than stage one

specs are:

Intake:

256 degree/duration 11.5 lift

264 degree/duration 11.5 lift

they are a lot higher than stage one hks cams, they are the "REVISED VERSION", in immac condition

wanting 700 now 650! POSTED or nearest offer MAKE AN OFFER NEED REGO MONEY! MAKE OFFERS NEEED IT GONEEEEEEEEEE

f**k IT NOW $600 POSTED

pics

34gnhq8.jpg

s14 series 2 front bar fog light with loom and mounting points, only rhs (drivers side), good for those who are missing one, perfect condition $75 posted to your door MAKE AN OFFER NOW $40 POSTED

2vxkbo4.jpg

up for sale is r32 front wishbone setup, both left and right both are straight, both come with control arms, new bushes for the wishbone, bolt straight in, also has rotors, jst no brakes and comes with hub of course, everything in good condition, came off a running car, no bearing noises etc et

SEPARATING TELL ME WHAT YOU NEED

28lsysh.jpg

have a pair of nexen 3000 radials for sale 235/45/17, local only, very good tread, bit of camber wear, only driven for 3000km still very new, have a geezer at the pics

2ceknsx.jpg

price is $200 for the pair MAKE OFFERSSSSSSSSSSSSSSSSSSSSS NOW $150

r32 rear bar does not come with reverse lights as on has broken only rhs reverse light is available

$70 or nearest offer YES IT IS A TYPE M REAR BAR does not come with reverse lights $50 !!!!!!

sc9cgm.jpg

r32 boot TYPE M in navy blue, comes with lock and is in perfect conidiotn has type m rear spoiler in blue as well

$70 or nearest offer MAKE OFFFFFFEEEERRRRR NOW $50

f2itj6.jpg

western suburbs melbourne pm or call 0413 926 794

  • 6 months later...

In need of this:

r32 front wishbone setup, both left and right both are straight, both come with control arms, new bushes for the wishbone, bolt straight in, also has rotors, jst no brakes and comes with hub of course, everything in good condition, came off a running car, no bearing noises etc et

If you could do just the left for cheaper, that would be great

pm me please

Alex

In need of this:

r32 front wishbone setup, both left and right both are straight, both come with control arms, new bushes for the wishbone, bolt straight in, also has rotors, jst no brakes and comes with hub of course, everything in good condition, came off a running car, no bearing noises etc et

If you could do just the left for cheaper, that would be great

pm me please

Alex

And i would like the right hand side, price ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...