Jump to content
SAU Community

Recommended Posts

I have for sale

New genuine N1 water pump Suit all RB's $ 300

New Alloy 6061 billet crank pulley Suit RB26 $ 300

New Forged 6061 under driven water pump and alternator pulley Suit all RB's $ 300

New Cometic VRS ( Top end gasket set ) Suit RB26 $ 450

New G-Reddy clear top belt cover $ 135

PM , Call or TXT

0407807195

Cheers

post-37725-1283319581_thumb.jpg

post-37725-1283319617_thumb.jpg

post-37725-1283319634_thumb.jpg

post-37725-1283319656_thumb.jpg

post-37725-1283320134_thumb.jpg

Light Weight factory belt layout Crank Pulley!

91-98 Nissan Skyline R32 GT-R RB26DETT

You will defiantly see a gain with this mod.

15+ Horsepower Gains!

$300

PM , Call or TXT

0407807195

Cheers

PM , Call or TXT

0407807915

PM , Call or TXT

0407807195

Cheers

post-37725-1283320492_thumb.jpg

post-37725-1283320500_thumb.jpg

post-37725-1283320508_thumb.jpg

Pulleys for RB Engines Rb26dett Rb20 Rb25 Rb20det RB25det RB30DET

New Engine Under driven pulleys for Nissan RB Series engine

.Material is 6061 forge Alloy

.Hard anodized 15 micro

.CNC Machined and Balanced

.Faultless Quality and Precision

.There also 1/3rd in weight

.Included in the kit is:

.1x Water Pulley Larger than std diameter Hard anodized 15 micro much longer work life!!!

1x Alternator Pulley Larger than std diameter for factory Mitsubishi alternator ( 17mm center hole) Hard anodized 15 micro much longer work life!!!

$300

PM , Call or TXT

0407807195

post-37725-1283320814_thumb.jpg

post-37725-1283320822_thumb.jpg

post-37725-1283320835_thumb.jpg

Cometic VRS

Multi layered Head Gasket

Suit 87mm bore

.051" thick

$450

PM , Call or TXT

0407807195

post-37725-1283321160_thumb.jpg

post-37725-1283321166_thumb.jpg

Edited by RB20DET BLUEBIRD

New Genuine N1 Oil Pump $ 450

PM , Call or TXT

0407807195 STU

( 3 network )

I have been getting a lot of low ball offers , i think these are the cheapest on SAU

I purchased doubles to build my race engine and a spare race engine

post-37725-1283422510_thumb.jpg

post-37725-1283422522_thumb.jpg

post-37725-1283422539_thumb.jpg

post-37725-1283422546_thumb.jpg

Are price negotiable?

Can move a little on price

I think these are the cheapest on SAU

I purchased doubles to build my race engine and a spare race engine

PM or TXT me your offers

Cheers STU

0407807195

New genuine N1 water pump Suit all RB's $ 300 , Trade price from my local Nissan dealer $394

Pm , Call or TXT

0407807195

Stu

post-37725-1284520039_thumb.jpg

post-37725-1284520076_thumb.jpg

  • 2 weeks later...

Can move a little on price

I think these are the cheapest on SAU

CALL , PM or TXT me your offers

Cheers STU

0407807195

Hey there

im interested in your pulley if its still around, just a question tho, what sort of power and rpm is it good for?

thanks

Matt

Hey there

im interested in your pulley if its still around, just a question tho, what sort of power and rpm is it good for?

thanks

Matt

PM Sent

Cheers STU

post-37725-1285496593_thumb.jpg

post-37725-1285496604_thumb.jpg

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...