Jump to content
SAU Community

Exedy "sports Single" Sports Ceramic For Gtr32 And A-spec For S13/s14

waiwng38
 Share

Recommended Posts

waiwng38 Enthusiast

waiwng38

Posted
Posted

i got this part forsale

Exedy "Sports Single" Sports Ceramic for GTR32

part number: NSK-7121SC

$600

13062009305.jpg

13062009304.jpg

5zigen A-spec catback for S13/S14

$600

A professionally aspired system inspired from the racing circuit

5ZIGEN is at a breakthrough point where we can take informative feedback from professional users and have the ability to research and develop high quality products to the end users. All stainless steel body with INCONEL used for the tailend. Inconel is a nickel base material use also used in the top race category Formula One. This is extremely heat resistant, more than titanium, which is why it is used not only in Formula One, but in aeronautics as well. No limitation with the PRORACER A-SPEC system

The 5zigen Pro Race A-Spec cat back exhaust system is perfect for the street with an average of only 90db but still offering the performance benefits. The tail muffler has been constructed with Iconel 600 which offers superior heat resistance and antirust. Manufactured from a unique combination of nickel and steel the tail features a hand burned blue finish.

all new in box

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...