Jump to content
SAU Community

Recommended Posts

Hey All

Your chance to get an awsome engine setup.

ITEM : BUILT RB24

CONDITION : BRAND SPANKING NEW

LOCATION : ADELAIDE

CONTACT : PM ME

PICTURES : WILL GET THEM UP LATER TONIGHT.

INFO : LONG LONG LIST BELOW

ENGINE RB24 ( BOTTOM END )

BOTTOM END IS BRAND NEW

SPEEDLAB CUSTOM RB24 ( CUSTOM MACHINED R34 GTR CRANK )

GRUB SCREWED CRANK

EAGLE RODS

TOMEI PISTONS

ARP RACE SERIES STUDS

TOMEI RINGS

PISTONS HAVE BEEN TEFLON COATED

FRESH LINE BORE AND HONE

ACL RACE SERIES MAIN AND ROD BEARINGS

CUSTOM SUMP BAFFLES WITH TRAP DOORS

CUSTOM 9L SUMP

N1 OIL PUMP

N1 WATER PUMP

CUSTOM HKS 1.2mm HEAD GASKET

HKS FUEL RAIL

NISMO ENGINE MOUNTS

THIS BOTTOM END HAS BEEN MADE TO STAND BIG HP AND BIG RPM. ONLY TOP QUALITY PARTS FROM JAPAN, USED AND THE BEST MACHINING HAS BEEN DONE.

THIS BOTTOM END HAS COST ME BIG $$$

ENGINE ( HEAD )

FULL RACE PORTING

JUN 272 – 10.8mm LIFT ( BIG ) INLET AND EXHAUST CAMS

JJR ADJUSTABLE CAM GEARS

TOMEI SPRINGS

TOMEI BUCKETS

GREDDY TIMING BELT

CUSTOM OIL DRAIN MACHINED FROM THE BACK OF THE HEAD TO SUMP.

CUSTOM PAINTED ENGINE COVERS

THIS HEAD IS TO SUIT ABOVE BOTTOM END, HAS BEEN FULL PORTED WITH BIG CAMS, LIFTERS, TOMEI SHIMS, TOMEI SPRINGS,

THIS HEAD HAS HAD OVER $7K SPENT ON IT IN MACHINING AND PARTS FROM JAPAN.

I HAVE ALSO HAD A CUSTOM RB26 INLET PLENUM MADE WHICH USES THE GTR PLENUM & 6 X THROTTLE BODIES AND SO ON.

ENGINE ( PERFORMANCE / FUN STUFF )

GENUINE HKS 25/30 ( DONE 2000KM SINCE NEW )

XSPEED JAPAN STAINLESS LOWMOUNT EXHAUST MANIFOLD

HKS DUMP ( SERIES 2 WITH LARGER GATE OUTLET )

AUTRONIC SM4 ECU, FULL CUSTOM WIRING AND SENSORS

587cc SIEMANS INJECTORS BRAND NEW

TOP SECRET FUEL REG IN TOP SECRET GOLD

OS GIKEN TWIN PLATE, USED FOR 3000KM IN GREAT CONDITION

SPEEDLAB DRAG COOLER ( 600 X 320 X 115 ) BIG!

SPEEDLAB CUSTOM INTERCOOLER PIPING AND INTAKE PIPE

SPEEDLAB OIL COOLER AND LINES

As you can see only the best parts have been used and in excess of $25K has been spen on this motor package.

Engine is 99% complete and sitting in one of my cars, So basically its a 100% brand new engine but have decided to spend more on my 34GTR hence selling this package.

Engine was built to handle 9K plus rpm all day long and handle big HP.

Engine has over $1000 in speedflow fittings and hose.

Only selling as i am returning to Japan late October to pick up my R34 GTR and need some extra funds / play money.

Im after $18K ONO for engine, clutch, g-box, autronic sm4 with loom and sensors, fuel system.

Motor should see 250RWKW with the 25/30 but will be aggresive as hell and rev hard all day long. Motor was built to handle much more but i wanted response and instant power hence the smallish turbo.

Get in quick for this bargain. Great engine for you drifters or awsome street car engine.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/336028-built-rb24/
Share on other sites

PICS BELOW

Currently engine is installed in 32 four door with alot of mods ( 2 way, cusco coil overs, cusco adjustable arms, gtr brakes and so on ) which i am selling complete with this engine or seperate but will advertise in the car section.

photo024p.th.jpg

photo021nw.th.jpg

photo019t.th.jpg

photo038k.th.jpg

photo001xi.th.jpg

photo020r.th.jpg

photo002fx.th.jpg

photo025ec.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/336028-built-rb24/#findComment-5438141
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...