Jump to content
SAU Community

Recommended Posts

I know this is a bit of a longshot, but does anyone out there have available a R33 GTR drivers side seat trim

I only need the fabric cover for the top half, not the seat, as I have just purchased a set of R33 seats, and the drivers side has a small tear - I have fixd it, but would like to some day have two perfect seats :)

I know this is a bit of a long shot, but if anyone has or knows of a drivers seat that has been broken or whatever and the trim is still in great condition, I will be very interested

also after passenger side sliding rail if anyone has one of these as well :D

Thanks , Chris

Link to comment
https://www.sau.com.au/forums/topic/33620-r33-gtr-drivers-seat-fabrictrim/
Share on other sites

last time i check is about 300 - 600 per seat... so therefore good luck.

Where abouts did you get this price from? I only paid $650 for BOTH seats, jus that the driver side seat has a small cigarette burn :(

first i am from melbourne so i dono if the price is defferent from ur place and my place.

second--- what material did quate for taiwan, china or japan. it make alo of different in long run.

thirds-- a frined of my want to do so and he told me that. HE get quate for jap material.

Hope this help,.,,anyway you get what u pay for ,..

ok no probs, might even try Nissan locally to see if they can help?

Has anyone ever had anything like this repaired before, if so I'd like to hear from them

Chris

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...