Jump to content
SAU Community

Recommended Posts

Mid '93 to the last R32's made in 1994 got the R33 crank. Unsure of the build date? run the VIN through Nissan FAST

make sure you check the engine number first though

we have an r32 gtr sitting here that we found out after purchase it has an r33 motor, along with a pile of other parts that were discovered while pulling down the motor the previous owner wasnt even aware of, or didnt bother mentioning while selling anyway.

Link to comment
https://www.sau.com.au/forums/topic/336271-noob-qustion/#findComment-5440987
Share on other sites

o ok , but i more was talking about after market builds , as mine as cp pistons and some other random stuff but unsure if the crank/ crank collar is done.

well the only way to know for sure would be to pull all the timing gear off and remove the oil pump i guess.

wouldnt take too long if you have all the tools and have done it before. but alot of work just to check for a collar

Link to comment
https://www.sau.com.au/forums/topic/336271-noob-qustion/#findComment-5441414
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
    • okay, so I figured this out, removed needles and reinstalled after swapping the gauge face on my triple gauge for my ER34, all work and look good. I tried to do the same for the main cluster, but the main cluster gauge faces are dished, the replacement gauge face are flat, so due to the dish in the org face ,mounting backing plate (clear) and depth of the needle, the flat gauge face will not work. I notice that R34 gtr gauges are flat, appears to be different clear backing plate that aren't dished. are these available, or what have others done to install flat gauge faces?
    • Cheers mate. Seems some people get lucky others don't. It looks like the motor was detonating (to be expected if it was overboosting I suppose) as the pistons had a lot of detonation damage, and the bearings were stuffed. The bores were very scoured too, not sure if that's from the pistons or bits of ceramic turbo. By the by now. Have been trying to avoid the rabbit hole too much on the rebuild, and there's been a few hurdles along the way, but with any luck I'll have the car back soon™. Might even pop up a thread then.  
    • Thanks, these seem to lay it out a bit differently. I will get back to you guys after i do some tests and more digging. 
×
×
  • Create New...