Jump to content
SAU Community

Recommended Posts

I have a Carbon Fibre bonnet for an R33 GTST for sale,

Comes with lockable Aero Latches

Bonnet alone is $1200 new and Latches are around $300 new.

Selling for $450

Located in Ipswich QLD, my number is 0423 799 320.

CarbonBonnet2.jpg

CarbonBonnet.jpg

Edited by TJ_R33
Link to comment
https://www.sau.com.au/forums/topic/336318-fs-r33-carbon-fibre-bonnet/
Share on other sites

anyone confirm if this will fit a R33 Series 3 GTR?? if it does, first dibs

Doubtful mate, GTR bonnets are longer, thats why the headlights have spacers behind them.

the GTR bonnet is alloy anyway and is prob just has light as the carbon fibre.

Doubtful mate, GTR bonnets are longer, thats why the headlights have spacers behind them.

the GTR bonnet is alloy anyway and is prob just has light as the carbon fibre.

hey is there any damage on the bonnet

hey is there any damage on the bonnet

There is a little bit on the left hand vent, nothing too bad. If you are doing a show car it would matter but no one noticed it when it was on my car.

You are more then welcome to come have a look if you arent to far away.

There is a little bit on the left hand vent, nothing too bad. If you are doing a show car it would matter but no one noticed it when it was on my car.

You are more then welcome to come have a look if you arent to far away.

oh ok im in townsville so im far but not in different state lol

oh ok im in townsville so im far but not in different state lol

lol, only 90min away.

You can see the damage in the second pic its on the top lip on the left vent..... towards the right abit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...