Jump to content
SAU Community

Recommended Posts

Gday im just about to get my licence and i need sum help.

I have been thinking of getting a r33 gtst but i keep getting told all different opinions on weather i can drive it on my p's or not (power to weight ratio). But im also looking at getting an NA r33 which is pretty stock cept for an exhaust and wheels and few other standard bits and pieces. But im being told they r fairly sluggish in standard form so im wondering wot i can do to it to give it a bit of go, if i choose to get a NA because i cant get the turbo.

Also im told insurance is realtively the same for both cars..........?

Im confused ne help apreciated.

Link to comment
https://www.sau.com.au/forums/topic/33701-need-ur-opinion/
Share on other sites

as I understand it, on your P's your only allowed 125kw per tonne or 3.5litres per tonne.

the r33 skyline is "actually" 138kw per tonne (car weighs round 1300kg)which means you cant legally drive it........BUT......VicRoads class the skyline as a coupe and automatically stamps it on the rego sticker as a 1500kg vehicle......which makes the skyline 120kw per tonne...which means it's legal.

so it's a bit of a grey area really. I drove round on my P's in a 5lt V8 commodore, when ever I was pulled up I told the cops it was a 253 (4.2lt) which they couldnt prove otherwise short of pulling the motor out so it was all good. Plus they wouldnt have a clue anyway. Dont do stupid things and you wont be hassled (well dont do them in built up areas anyway), steer clear of cruising round late at night/in the AM hours of the weekend.

Heaps of R33's round Geelong are P platers so I'm guessing its legal. VicRoads fault...."i didnt know the weight of the car......the sticker says.."

hope I've helped

Link to comment
https://www.sau.com.au/forums/topic/33701-need-ur-opinion/#findComment-675928
Share on other sites

yeah theres a thread in the N/A section covering insurance for an N/A vs turbo, its not that much difference, like $500 tops depending on other conditions and your history age location etc...

abcent has a good point, not sure how that would hold up, does that apply to all r33s?

does this mean

u: the car is 1500kgs, look at the sticker

authorities: oh its wrong here lets weigh your car, oh look it weighs 1300, here have a fine

or cos vicroads stamped it wrong means they cant do shit?

interesting technicality

Link to comment
https://www.sau.com.au/forums/topic/33701-need-ur-opinion/#findComment-676152
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...