R33 Blitz Boost Controller

[NikhtaR33]

hey guys...ive recently just bought my dream car...a R33 Gts25t....loving it so far....

current mods.....

3"exhaust system

K&N Pod Filter

Front Mount Intercooler

HKS Turbo Timer

Blitz Dual SBC Boost Controller

Had been given tune and made 285hp at the wheels....

However the boost settings on my controller have been changed and I have no idea what they should be set back to...It was tuned to run on 10psi around 0.75 bar or just under which it done fine up until now...

can any one help me out as to what setting it should be on?

when selecting a setting it has 3 screens...

first screen with 0.00

second with GAIN 0.00

and third it is on 0 now

Can anyone help please?

thanx Nikita

[wasnt me]

mate check out the instruction manual. should be one in the link below if you dont have one.

http://www.xspeed.com.au/manuals.php

[NikhtaR33]

thanx mate...im having a look...but still pretty lost anyway...thanx alot for the help

[NikhtaR33]

does any one have a boost controller like this?

could anyone provide their personal settings if theyr set to around 10psi???

[Moodles2]

Every car is different and responds differently (even amongst same models), someone else personal settings might make 16psi for example and destroy your stock turbo.

[wasnt me]

its best to just start low and keep adding more till you get the boost your after. i had my gain set to 10 which didnt spike. the boost at a guess will need to be set around 35%. 20% will be a good starting point

[NikhtaR33]

ok so if i start it at around 20% and work it up with a gain of around 5 or so that should be ok then?

[wasnt me]

yeah that will be fine. just set the over boost warning so you know if its boosting over say 12psi

[NikhtaR33]

Ohh ok thanx heaps...I'll have to check the manual out and set that up before I set it up...thanx heaps

[NikhtaR33]

i changed it today and took it for a drive...i set it up to 30% with a gain setting of 5....drove pretty good...didnt want to put it up anymore just yet...warning light came on....it said peak hold (meant to be max boost it hit) was 0.69 hkpa...is that the same as 0.69 bar?? so tha should be safe?

[Moodles2]

0.69hkpa is spot on 10psi

[NikhtaR33]

cool thanx heaps...thats what i was told but when i looked at my gauge it was reading just about 0.5 bar boost????