Jump to content
SAU Community

Of Possible Interest To Dr30 Owners

sobeksminion
 Share

Recommended Posts

Ghostrider Grand Master

Ghostrider

Posted
Posted

I think he wants too much money for this, after all it's only pipe your buying and secondhand as well. MAG86 recently bought a similar stainless system for about half of this and just because it says it's Kakimoto, doesn't really mean it's worth this much.

Cheers, D

Factory 5 Mentor

Factory 5

Posted
Posted

I'd pay good money for the rear 'over diff' section. spending more than that $300 to get the existing setup re-jigged and altered.

If there was an off the shelf option at the time I would of definitly gone with it.

Pity its not local, shipping is always a killer.....

GTR30 Community Regular

GTR30

Posted
Posted (edited)
I'd pay good money for the rear 'over diff' section. spending more than that $300 to get the existing setup re-jigged and altered.

If there was an off the shelf option at the time I would of definitly gone with it.

Pity its not local, shipping is always a killer.....

shipping is a killer is right.. i just bought some sway bars for the chaser and freight+commission is nearly 2/3rds of the price of the bars! still cheaper than local like most of the bits i've been buying :P

might be going down to see my old R30 soon when we swap the rego over to the new owner.. sounds like it's going to be a tear jerker (cause it has been looked after very nicely)- i miss the old girl

Edited by GTR30
harvo Collaborator

harvo

Posted
Posted
Nah, I didns see any bids on them.

send him a message on ebay

tehy look like they would howl

I bid on them at the asking price of $300 but they sold for $305.50 or something like that. Was going to bid at the last minute but they finished past my bed time :laugh: wow I'm so old and lame

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • PranK
      Blue slip

      By PranK · Posted

      Should have asked what is the car?
    • PranK
      Blue slip

      By PranK · Posted

      I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
×
×
  • Create New...