Jump to content
SAU Community

Recommended Posts

Hey all just installed JJR adjustable camber arms front and rear and i am getting alot of noise from the front arms.

Now is it normal for this until they are 'worn in' or is there a big problem??

Any help will be greatly appreciated

Cheers

Link to comment
https://www.sau.com.au/forums/topic/338122-camber-arm-noise/
Share on other sites

That sounds about right. The bushes in the JJR arms are solid as f**k compared to stock and all the little humps and bumps the stock bushes would normally absorb sounds like knocking in the suspension with the more solid JJR arms. What other suspension mods have you done to the rear?

I bought some used Noltec adjustable front upper arms, and exactly the same thing happened to me.

So I thought, this can't be right and went out and bought some nice new japanese Silkroad adjustable upper arms. It minimised the occurance of the noise probably by about 50% but still makes the knocking sound over large bumps.

How low is your car?

I had the car raised with the adjustable arms in and had no issues with any knocking noises what-so-ever. When lowered the arm doesn't 'seem' to be hitting the wheel well but it sure looks close.

Edited by -Jimmy-
That sounds about right. The bushes in the JJR arms are solid as f**k compared to stock and all the little humps and bumps the stock bushes would normally absorb sounds like knocking in the suspension with the more solid JJR arms. What other suspension mods have you done to the rear?

The rears arnt making any noise just the fronts, but suspension mods on the car are:

Cusco Zero2 coilovers

Nismo sway bars

and now the JJR camber arms front and rear

I bought some used Noltec adjustable front upper arms, and exactly the same thing happened to me.

So I thought, this can't be right and went out and bought some nice new japanese Silkroad adjustable upper arms. It minimised the occurance of the noise probably by about 50% but still makes the knocking sound over large bumps.

How low is your car?

I had the car raised with the adjustable arms in and had no issues with any knocking noises what-so-ever. When lowered the arm doesn't 'seem' to be hitting the wheel well but it sure looks close.

Car isnt that low, well above legal height

There is no sign of the arms hitting the wheel well

pic of car height

IMG_0238.jpg

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...