Jump to content
SAU Community

Recommended Posts

http://www.nengun.com/auction/item/v163900055

Pretty much want my interior to look like the above how does it work etc ?

say if i was to buy it do they just get thrown over or ?

Also i have abs bags behind my drivers and passengers seat i had a hard time throwing over seat covers as they just don't fit :\

theyre fitted throw overs, not universal throw overs, so they work a bit better, but you would need the same seats etc as the ones they are suited for.

ebay sells fitted leather throw overs to suite different cars, give them a look

  • 2 weeks later...

hey mate,

You can try proseat http://www.proseat.com.au/testing/Nissan_R33_GTST_1.html they are based in Victoria. :thanks: came across them on ebay. They do front two seats and back seat for 570$ and free door trims and gearbox surroundings. That's what they quoted me on a r33 :D. Let me know if you get them done.. post some picture :thumbsup:

they look good from the pics, but i just got this feeling that they might be loose and similar to a universal seat cover :whistling:

id like to get some feedback from someone who actually has them

I went for ultimate auto trim in my R33 GTST. http://www.ultimateautotrim.com/

professional service. and the product has been great (been in over a year now, no problems).

I paid $900 (delivered to WA) for the full car option. front and rear seats, black and ivory colour combination, gear boot, handbrake, centre console cover, door panels, and rear speaker panel.

For the seats its essentially a perfectly fitted cover (matched to the R33 seat) that you then stitch onto the seat (easy job, just pulling about 8-12 cords through the seat to secure the cover)

Edited by jjman
I went for ultimate auto trim in my R33 GTST. http://www.ultimateautotrim.com/

professional service. and the product has been great (been in over a year now, no problems).

I paid $900 (delivered to WA) for the full car option. front and rear seats, black and ivory colour combination, gear boot, handbrake, centre console cover, door panels, and rear speaker panel.

For the seats its essentially a perfectly fitted cover (matched to the R33 seat) that you then stitch onto the seat (easy job, just pulling about 8-12 cords through the seat to secure the cover)

wait... you stitch them to the seats?

wouldnt that wreck the original seats?

I went for ultimate auto trim in my R33 GTST. http://www.ultimateautotrim.com/

professional service. and the product has been great (been in over a year now, no problems).

I paid $900 (delivered to WA) for the full car option. front and rear seats, black and ivory colour combination, gear boot, handbrake, centre console cover, door panels, and rear speaker panel.

For the seats its essentially a perfectly fitted cover (matched to the R33 seat) that you then stitch onto the seat (easy job, just pulling about 8-12 cords through the seat to secure the cover)

Seen jjman's Interior and it looks Awesome.

+1

Edited by SL33K

+1 for ultimate auto trim

i got full set for my 32

they have auctions on ebay starting at 99c occasionally

i got a full set with rear parcel shelf, door trims and centre console lid for $500

http://cgi.ebay.com.au/SEAT-COVER-NISSAN-S...=item4cf2c18de2

thats one thats up to 150

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...