Jump to content
SAU Community

Recommended Posts

I'm running the whiteline adjustable SR front bar in both my laurel and cefiro, haven't had any issues with it hitting the sump, on full drop it comes close but when the car is on the deck it clears. the only problem i have it the arm isn't quite long enough over the LCA to make the link sit more up right, but its not enogh to affect me

I bought them both over 2 years ago so unless the design has changed significantly there shouldn't be aby issues. Just have to remember to fit it with the wheels supported so your not trying to fit it with the LCA's at two different heights and with them at droop.

I'm running the whiteline adjustable SR front bar in both my laurel and cefiro, haven't had any issues with it hitting the sump, on full drop it comes close but when the car is on the deck it clears. the only problem i have it the arm isn't quite long enough over the LCA to make the link sit more up right, but its not enogh to affect me

I bought them both over 2 years ago so unless the design has changed significantly there shouldn't be aby issues. Just have to remember to fit it with the wheels supported so your not trying to fit it with the LCA's at two different heights and with them at droop.

is the car for drifting? that has extra lock?

Yeh use the laurel now for drift, has shit loads of lock, control arms have been pushed out 20mm run a +22 17 x 9 on a 25mm spacer, NP wonder knuckles, scalloped control arms and supernow rack spacer, it rubs a little but not enough to warrant worrying about at the moment, and that is more so on the castor rod.

hmmmm id still try to browse around for the a31 ones.. or custom made one :ermm: but if not then ill buy the s13 ones..

thanks guys!!!!!!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
×
×
  • Create New...