Jump to content
SAU Community

Recommended Posts

HEY ALL

TRYING TO DECIDE IF I WANT TO SELL MY CAR AS A WHOLE OR PULL HER DOWN AND SELL HER IN PEICES? ONLY SELLING DUE TO OTHER COMMITMENTS.

JUST WANT TO GET A FEEL FOR WHAT PEOPLE WANT AND IF I GET ENOUGH INTEREST IN PULLING HER APART THEN I WILL. IF NOT THEN ILL SELL HER COMPLETE.

OH AND SORRY FOR THE CAPS , FOR SOME REASON IT WONT ALLOW ME TO WRITE IN ANYTHING OTHER THEN CAP LETTERS? ( GOTTA LOVE TECHNOLOGY )

ITEM : TURBO KIT

GENUINE HKS 25/30 ( LESS THEN 3000KM ON TURBO, NO PLAY AT ALL )

GENUINE HKS SERIES 2 DUMP ( LARGER WASTEGATE PIPE )

GENUINE HKS ACCUATOR

XSPEED JAPAN STAINLESS LOW MOUNT EXHAUST MANIFOLD

ALL FITTINGS AND LINES

THIS KIT MADE 270RWKW AND 840NM OF TORQUE ON MY BUILT RB24

AWESOME SETUP , INSTANT RESPONSE

PRICE - $2500.00

ITEM : BUILT RB24

ENGINE HAS JUST BEEN RUN IN WITH THE ABOVE TURBO KIT AND IS A ANIMAL!!

BOTTOM END IS BRAND NEW

SPEEDLAB CUSTOM RB24 ( CUSTOM MACHINED R34 GTR CRANK )

GRUB SCREWED CRANK

LINISHED CRANK

EAGLE RODS

TOMEI PISTONS

ARP RACE SERIES STUDS

TOMEI RINGS

PISTONS HAVE BEEN TEFLON COATED

FRESH LINE BORE AND HONE

ACL RACE SERIES MAIN AND ROD BEARINGS

CUSTOM SUMP BAFFLES WITH TRAP DOORS

CUSTOM 9L SUMP

N1 OIL PUMP

N1 WATER PUMP

CUSTOM HKS 1.2MM HEAD GASKET

THIS BOTTOM END HAS BEEN MADE TO STAND BIG HP AND BIG RPM. ONLY TOP QUALITY PARTS FROM JAPAN, USED AND THE BEST MACHINING HAS BEEN DONE.

THIS BOTTOM END HAS COST ME BIG $$$

ENGINE ( HEAD )

FULL RACE PORTING

JUN 272 – 10.8mm LIFT ( BIG ) INLET AND EXHAUST CAMS

JJR ADJUSTABLE CAM GEARS

TOMEI SPRINGS

TOMEI BUCKETS

GREDDY TIMING BELT

CUSTOM OIL DRAIN MACHINED FROM THE BACK OF THE HEAD TO SUMP.

CUSTOM PAINTED ENGINE COVERS

THIS HEAD HAS HAD OVER $7K SPENT ON IT IN MACHINING AND PARTS FROM JAPAN.

THIS WOULD MAKE A GREAT STREET ENGINE OR TRACK ENGINE.

$7800.00

ITEM : FUEL SYSTEM

ALL THE BELOW ARE NEAR BRAND NEW, SHOULD SEE MID 300KW WITH THIS SETUP

SIEMENS 587cc INJECTORS TO SUIT GTR

HKS FUEL RAIL

TOP SECRET SARD FUEL REG

BOSCH 044

CUSTOM 6L SWIRL POT

$1200.00

ITEM : FRONT MOUNT

HUGE!

CUSTOM SPEED LAB FRONT MOUNT 600X320X130

CUSTOM ALLOY PIPING ( PIPING TO SUIT GTR PLENUM )

$1000,00

ITEM : CUSTOM GTR PLENUM FOR RB20

MUST HAVE FOR ANY ONE WITH A RB20!! ALOT OF HARD WORK WENT INTO THE MAKING OF THIS. SOUNDS AWESOME.

R33 GTR PLENUM

CUSTOM R33 GTR THROTTLE BODIES TO SUIT RB20

$1500.00

ITEM : ECU-COMPUTER

AUTRONIC SM4

CUSTOM RB LOOM

COMES WITH VDO SENSORS AND WARNING LEDS ( OIL PRESSURE AND FUEL PRESSURE )

CAN BE RE PROGRAMMED TO SUIT ANY APPLICATION, WAS TUNED AND AND MADE FOR ALL THE ABOVE ITEMS.

$1800.00

ITEM : WHEELS

R33 GTR WHEELS AND TYRES

IN OK CONDITION HAVE A COUPLE MARKS ON THEM

FRONT TYRES – 90%

REAR TYRES – 60%

BRIDGESTONE POTENZA

$850.00

ITEM : COIL OVERS

CUSCO COMP COIL OVERS TO SUIT R32 + OTHERS

GREAT COIL OVERS, HANDLING IS UNREAL AND SMOOTH

GREAT CONDITION, NO LEAKS

$1000.00

ITEM : DIFF

KAAZ 2 WAY

GTR DIFF COVER FOR EXTRA OIL AND COOLING

LOCKS UP LIKE YOU CANT BELIEVE

$850.00

ITEM : SEATS

R33 GTR FRONT SEATS

FIT IN 32 33 GTST

NO RIPS OR TEARS

$650.00

ITEM : CLUTCH

HKS TWIN PLATE CLUTCH AND FLYWHEEL TO SUIT RB20 BOX ( NOT SURE IF IT FITS OTHERS BUT THINK I WOULD )

LESS THEN 3000km ON IT

$1500.00

ITEM : N1 R32 HEAD LIGHTS

N1 HEAD LIGHTS, NO CRACKS

$450.00 PAIR

ITEM : R32 SHELL

I HAVE MY R32 GTST FOUR DOOR SHELL THAT HAS REGO UP FOR SALE INFO BELOW

SILVER, BODY IS A LITTLE RUFF BUT STILL PRITTY GOOD CONSIDERING ITS OVER 20 YEARS OLD

1989 MODEL

R32 GTR BRAKES AND SLOTTED ROTORS

HYDROLIC HAND BRAKE

ARC FRONT CASTER ARMS

CUSCO UPPER FRONT ARMS

CUSCO REAR UPPER ARMS

CEFIRO ENGINE X MEMBER ( ENGINE SITS LOWER THE STANDARD X MEMBER )

90% OF INTERIOR STILL THERE

99% OF ALL PANELS

HEAPS OF OTHER BITS AND PEICES

MINUS THE BELOW

NO ENGINE OR ENGINE RELATED PARTS

NO GEAR BOX

NO DIFF

NO ECU OR WIRING

NO SUSPENSION

NO WHEELS

NO HEAD LIGHTS

COUPLE OTHER SMALL BITS MISSING

$4000.00 INCLUDING REGO!

CONDITION : ALL ITEMS ARE IN GREAT CONDITION UNLESS OTHERWISE STATED

LOCATION : ALL ITEMS ARE IN ADELAIDE, POSTAGE AT BUYERS EXPENSE

CONTACT : PM ME

PICTURES : CAN MMS PEOPLE PICS

Link to comment
https://www.sau.com.au/forums/topic/340360-eoi-parts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...