Jump to content
SAU Community

Recommended Posts

hey all, im having a tad bit of a problem at the moment...

my window of my drivers door, r33 gtst has decided to lock and not move... wouldnt normally be a urgent problem except that the window is locked out in the down posistion... the motor is stuffed so i have no way of getting it back up!

i have tried all things and i have power going to the clip just before the window motor... so i know its fine up to there.

i have also put direct 12v onto the motor and still no luck.

does anyone know where i can get one or does anyone here have a drivers side window motor that could work for my car.

Just paranoid that my car is being left with the window down at the mo.

Thanks in advance guys,

God Bless,

Nate

be careful when you change ur motor i changed mine in the drivers door too and the spring went back on my finger and cut it open to the bone requring a few stiches, WATCH THAT SPRING, hehehehe

try JustJap, its pretty pricey but i couldnt find anything else at the time.

Cam.

cheers cam,

i know what you are talking about :)

well i got a left hand unit from just jap and swaped the cogs and brackets over. works fine now :)

so anyone who needs help with a change over... call me.. i know everything there is to skyline windows now.

Mine was playing up, and it turned out to be the solid brush not contacting properly with the rotor. I bent it a little with long nose pliers and it's a goer.

Also if they play up and you want to wind it up you can take the magnetic cover off the motor without removing the whole assembly (through the speaker well), as it has only two scews. You can then wind it up by turning the rotor manually.

hey all, im having a tad bit of a problem at the moment...

my window of my drivers door, r33 gtst has decided to lock and not move... wouldnt normally be a urgent problem except that the window is locked out in the down posistion... the motor is stuffed so i have no way of getting it back up!

i have tried all things and i have power going to the clip just before the window motor... so i know its fine up to there.

i have also put direct 12v onto the motor and still no luck.

does anyone know where i can get one or does anyone here have a drivers side window motor that could work for my car.

Just paranoid that my car is being left with the window down at the mo.

Thanks in advance guys,

God Bless,

Nate

Im having exact same trouble with my ZX at moment ..... the window will go down but not up .... so my car is sitting in works carpark with window down :cheers: Paranoid! and cars aircon doesnt work and the heater is stuck on so basically i die of heat stroke having the windows up or i have the windows down and someone can just come n take the car :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...