Jump to content
SAU Community

Recommended Posts

After changing my cpu the old paste has become a bit worn out (only half the cpu is covered in a thin layer now) idle temp is around 40 degrees where it should be 25-30.

Ive checked MSY which has lots listed on the website but they never have the paste in stock, also checked on centrecom,scorpion,pcws websites and none of them have thermal paste listed.

All ive found is this. http://www.jaycar.com.au/productView.asp?I...mp;form=KEYWORD

I know its only $7 but still i want something good on my cpu, dont wanna have to clean it off to replace it and reseat the cooler because it may be crap. Anyone used this or know where I can find some good paste?

Link to comment
https://www.sau.com.au/forums/topic/341703-where-can-i-get-thermal-paste/
Share on other sites

Just go to PC Case Gear

www.pccasegear.com

You can order online and then go pickup, or just have it delivered.

This is the best on the market at present far as i know:

http://www.pccasegear.com/index.php?main_p...oducts_id=12710

pc case gear FTW

I usually use Arctic Silver cause we have a whole bunch of it here at work.

TBH though it's more about how you apply the paste (spread a thin layer evenly on the cpu rather than making blobs) than the actual content of the paste itself.

Thanks, Would rather an easy pick up without having to order, Did you know anywhere else with it available instantly? but those temp results look pretty good. Have you tried it yourself?

I use that Termal paste myself on all the builds i do for people, my own E8400 runs 4.3ghz day in/day out and i think idles around 35 degrees with a reasonable voltage behind it :P

Go down to Scorp Tech or something (just google, plenty of PC places in Melb), but you'll usually pay a bit more again, and they tend not to have the diversity.

For PCCG, you order online and its generally ready within a couple hours anyway mate. So order, go get some lunch and by the time your done it'll be ready to collect :D

I got impatient and went to centrecom and got some Deepcool z5, Couldnt find any reviews for it and dont know why i bought it, but it works good :P I thought if i ordered it I would be waiting for around a week. Oh well still happy with this stuff for $12 3g tube. Was hard to squirt the blob in the middle, little stringy bits stretched as i took the syringe away. So i ended up doing the spread technique over the blob.

Cpu is overclocked to 3.8ghz now and running at pretty much the same temps with a slight bump from 1.34v to 1.38v 30 degree idle then upto 42 while playing starcraft 2 4v4 lol. Havnt given it a propper prime test yet though.

I ain't CPU limited on any game... so struggling for a reason to upgrade at the moment given i need cash for other endeavours :D

Hottest I get to in 4v4 is around 50c :P

I suspect though my cooler might not be mounted all that good since my last dust cleanout

ahh you're not playing the right games then mang! 4 cores FTW

should get into overclocking mine, but now I'm lazy and CBF lugging it to work again to start pulling apart n replacing stuff in

lol... SC2 doesnt use a lot of CPU overall, only during load.

Its more ram intensive.

Plus most other games i play seem fine, hardly ANY games are multi core

I think my cpu AM3 965 tops out around the 4.0-4.1 mark. Most people on the overclockers forum stopped at 4.0ghz. Is yours water cooled? 4.3ghz is massive for the 8400 lol.

Just on air :)

lapped the CPU as well though, that saw a 8 degree drop under load which was awesome.

4ghz stable :P 55max during prime. cheapo coolermaster 212+ and my crappy Deepcool z5 paste was good enough :laugh: Wonder why lots of people are struggling to get 4ghz with there $120 heatsinks and perfectly applied thermal paste. I just put in 20x200 and 1.45v and I'ts happy lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...