Jump to content
SAU Community

Recommended Posts

FOR SALE R33 SKYLINE GTST-rego till Feb. 2011

I had planned to use this car as a weekend track car so the interier is partially removed and the a/con has been removed but I have the interier parts in the garage to go with the car, SO, either refit and keep the car on the road or take it as a track car and leave it in its present state.

Mods include-Plazmaman Plenium, Hybrid Front mount intercooler, Turbosmart BOV-plumbed in, Turbosmart E-boost 2 controller, big injectors, pod filter-K & N, Apexi Power Fc hand controller, running 14 pounds of boost atm, CES Racing Systems Turbo back exhaust-screamer pipe ( plumbed in before cat ) Big bore exhaust with cannon 5 in tip. Greddy turbo timer, Boot mount battery set up, Tien Super Street coilovers, staggered wheel sizes-Front 18 x 8 and Rear 18 x 9. Front tyres Toyo R888 225 40 18 semi slicks ( have 2 spares ) Rear tyres 255 35 18 Potenza RE 050 a RFT, also have 4 spare rear tyres-Dunlop Formula W1 275 35 18 semi slicks AND two spare rims 18 x 8 with 235 40 18-6 wheels in total and plenty of rubber. Rear wheel arches rolled. Brakes over hauled-new 5.1 fluid, carbon technology pads in front, front and rear rotors just machined. No ABS. No rear stearing-Hiacs lock bar fitted, clutch fluid replaced with 5.1 fluid, Xeedy Sports tuff Performance clutch, Gates timing belt fitted along with new water pump and cleaned cooling system- 1.1 radiator cap, Blue bulbs fitted to all driving lights/headlights/parkers, engine and gearbox oil changed , well maintained car, reliable and making good power, stock internals ( i think ) , Nismo White dialled instrument panel-320 klm speedo, 11000 rpm tacho showing about 35000 kays HOWEVER the engine has done closer to 125000 kays from new. Strut brace fitted-front, car is very stiff and handles fantastically, power steering fluid replaced. Priced to sell, loaded with power and handling mods, $ 10,000

The car is in Eight Mile Plains/Sunnybank area and can be viewed any time. Contact Stephen at [email protected] or on 041 046 8989. Thanks

Link to comment
https://www.sau.com.au/forums/topic/342230-r33-skyline-for-sale/
Share on other sites

  • 2 weeks later...
FOR SALE R33 SKYLINE GTST-rego till Feb. 2011

I had planned to use this car as a weekend track car so the interier is partially removed and the a/con has been removed but I have the interier parts in the garage to go with the car, SO, either refit and keep the car on the road or take it as a track car and leave it in its present state.

Mods include-Plazmaman Plenium, Hybrid Front mount intercooler, Turbosmart BOV-plumbed in, Turbosmart E-boost 2 controller, big injectors, pod filter-K & N, Apexi Power Fc hand controller, running 14 pounds of boost atm, CES Racing Systems Turbo back exhaust-screamer pipe ( plumbed in before cat ) Big bore exhaust with cannon 5 in tip. Greddy turbo timer, Boot mount battery set up, Tien Super Street coilovers, staggered wheel sizes-Front 18 x 8 and Rear 18 x 9. Front tyres Toyo R888 225 40 18 semi slicks ( have 2 spares ) Rear tyres 255 35 18 Potenza RE 050 a RFT, also have 4 spare rear tyres-Dunlop Formula W1 275 35 18 semi slicks AND two spare rims 18 x 8 with 235 40 18-6 wheels in total and plenty of rubber. Rear wheel arches rolled. Brakes over hauled-new 5.1 fluid, carbon technology pads in front, front and rear rotors just machined. No ABS. No rear stearing-Hiacs lock bar fitted, clutch fluid replaced with 5.1 fluid, Xeedy Sports tuff Performance clutch, Gates timing belt fitted along with new water pump and cleaned cooling system- 1.1 radiator cap, Blue bulbs fitted to all driving lights/headlights/parkers, engine and gearbox oil changed , well maintained car, reliable and making good power, stock internals ( i think ) , Nismo White dialled instrument panel-320 klm speedo, 11000 rpm tacho showing about 35000 kays HOWEVER the engine has done closer to 125000 kays from new. Strut brace fitted-front, car is very stiff and handles fantastically, power steering fluid replaced. Priced to sell, loaded with power and handling mods, $ 10,000

The car is in Eight Mile Plains/Sunnybank area and can be viewed any time. Contact Stephen at [email protected] or on 041 046 8989. Thanks

BUMP

Same car, different stages of work. allways a work in progress lol

the fibreglass bonnet is off the car atm , so is the fibreglass boot. original bonnet and boot is on car and wheels have been painted black( today)

post-72508-1289817830_thumb.jpg

post-72508-1289817886_thumb.jpg

post-72508-1289817955_thumb.jpg

post-72508-1289818005_thumb.jpg

post-72508-1289818039_thumb.jpg

post-72508-1289818099_thumb.jpg

post-72508-1289818121_thumb.jpg

post-72508-1289818227_thumb.jpg

  • 3 weeks later...

hey mate sorry for being a pain but just wondering what type of front bumper that is? I quite like the look of it and it seems to retain the stock indicators? whats the height of the bumper?

hey mate sorry for being a pain but just wondering what type of front bumper that is? I quite like the look of it and it seems to retain the stock indicators? whats the height of the bumper?

Sorry m8 I dont know what Brand the body kit is.

It was on the car as is, front bar, side skirts, spoiler, rear pods.

you can have the front bar if you like it, just buy the car lol

cheers

what the hell is this dyno sheet doing on my advert????

Ive just looked at my ad for my car for sale and there is a dyno sheet next to my car for sale??????????

It looks as tho the dyno readout is part of my ad , IT IS NOT.

Who put it on my ad page??? take it off.

Stephen, r33 for sale -not related to the dyno printout seen next to my add. ( my car has a heap more power than the readout and thats misleading )

  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...