Jump to content
SAU Community

Nissan Skyline R34 Gt-t Seats

KSV
 Share

Recommended Posts

KSV Apprentice

KSV

Posted
Posted

I have front and rear seats for an R34 GT-T that I tried selling on Ebay however had no bids. I originally purchased the seats from a bloke that had a R34 when it was only 11 months old for 800.00. I'm either looking to sell the seats (looking at getting at least 600.00) or swapping them for a very clean set of R33 GTS/ GTS-T seats??? plus 200.00 on top. This is a very good deal and if any Melbourne dudes are interested please E-mail on [email protected] or call 0413 606 469. Please Note: The photo shown is the same photo is used when advertising the seats on Ebay, it is not of the actual seats however the actual seats are totally identical in every way.

Link to comment
https://www.sau.com.au/forums/topic/34233-nissan-skyline-r34-gt-t-seats/
Share on other sites
KSV Apprentice

KSV

Posted
  • Author
Posted

there you go, here are the photos, as per the add, the photo shown is the same photo I used when advertising the seats on Ebay, it is not of the actual seats however the actual seats are totally identical in every way. Also (HKSgtst & Denton R33) re the fitting of the seats, I have an R33 sedan which has a different floor pan to the coupe, so the bolt straight into a coupe - they do not fit into R34 GTR's though (coupes or sedans) as they have different floor pans. At the end of the day, if they dont fit then there's no deal. Also I'm happy to do the deal with SII seats provided the rail set up is the same as SI, if you want to further discuss please call, or if you Email to [email protected] I cannot respond til tomorrow as I cannot reply to E-mails from home (just the office).

KSV Apprentice

KSV

Posted
  • Author
Posted

ok everyone - here's the verdict... R34 GT-T seats look absolutely crazy in an R33 coupe. I have taken digital photos of my friends R33 GTS-T with the R34 GT-T rear seat fitted along with the sides, parcel shelf and floor pan. They look nuts and go very well with the black trims. All bolts and holes fit and line up aswell.

KSV Apprentice

KSV

Posted
  • Author
Posted

Bad news all, R33 coupe rear seats dont fit in R33 sedans - unfortunately I cannot trade. I'm having the R34 GT-T seats modified (highly modified) so they can be fitted in my sedan. If anyone is interested in seeing the end result let us know.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...