Jump to content
SAU Community

Recommended Posts

Hey guys, just wondering if anyone knows the flow rate for our n/a injectors. And would upgrading to some GTS-T injectors and fuel pump make any difference except for running it a bit richer? Would you need an safc or something to make use of the upgrade injectors? I noticed at the dyno day all our n/a's were running quite lean.

Can pick up some injectors and pump for fairly cheap so just wondering.

Link to comment
https://www.sau.com.au/forums/topic/34282-fuel-pump-and-injectors-upgrade/
Share on other sites

the injectors can handle more then enough flow for ne possible mods u can do keeping the engine NA, an SAFC will help richen it up if thats what u want but keep in mind rich generally ='s less power.

Cheers

John

yes but 7psi boost is a big difference to ne perfomance mods that could be done whilst still keeping an engine NA. Maybe i worded it poorly but i said nething that can be done to the engine while still keeping it NA the injectors and pump would probabl;y handle it within reason. For eg, my pump is giving me ample fuel for an extra 75hp and is quite happy to do that but it would be a hell of alot of work to get an extra 75hp out of an NA engine without nitrous or turbo. Dunno if im making sense its too early in the morning but i think thats what i mean.

If you're talking exhaust, pod etc you should be fine, as you will only get a few hp...but if you're looking at increasing compression, getting the head ported polished etc...you may find leans spots. I'm really suprised that the nitrous hasn't leaned you out actually.

_turtle_ got what i was trying to say, big day at work just couldnt put the words together. Umm yeah no the nitrous doesnt lean it out at all, infact the car runs really rich with it, like the AF guage goes spastic and lights up every green bar it has. My boss says my injectors should cope with the rb30 block and huge headwork to the twincam head but i spose only time will tell.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...