Jump to content
SAU Community

Recommended Posts

Hey guys just got a hold of a HUD for my stagea it's got the two plugs but 6 wires that I can't figure out. Does anyone have a wiring diagram or know were they go? Any help would be great!

Edited by jonny8ball
Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/
Share on other sites

Hey guys just got a hold of a HUD for my stagea it's got the two plugs but 6 wires that I can't figure out. Does anyone have a wiring diagram or know were they go? Any help would be great!

Nobody know? Come on someone has to have had this problem before.

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5547985
Share on other sites

Nobody know? Come on someone has to have had this problem before.

Had a look today and I don't even seem to have the plugs in the dash! Has anyone fitted one of these or have any info on them. If I can't get it working it's gonna have to be sold on :thumbsup:

Any HUD owners have a look in the dash on where it plugs in or wires up??? Please guys I really need help with this!

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5548216
Share on other sites

Ive seen these huds that replace the clock, with the compass yeah? Was this a dayz option? Did you buy from a forum member? I would ask them, cant be that hard mate with a bit of perseverance. If that fails then auto sparky?

Edited by dirtyRS4
Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5548221
Share on other sites

I got your message, the person you want to speak to is matt turner, he has one that is wired up but I think there was one option that he couldn't get working due to not being able to find enough wires in the dash, well the right wires any way.

good luck

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5548541
Share on other sites

Ive seen these huds that replace the clock, with the compass yeah? Was this a dayz option? Did you buy from a forum member? I would ask them, cant be that hard mate with a bit of perseverance. If that fails then auto sparky?

Yep that's the one not sure if it's a dayz option. No didn't buy it from a forum member got it from japan mate.

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5549422
Share on other sites

I got your message, the person you want to speak to is matt turner, he has one that is wired up but I think there was one option that he couldn't get working due to not being able to find enough wires in the dash, well the right wires any way.

good luck

Thanks so much mate for pointing me in the right direction, do you know Matt turners username so I can send him a message to see if he can tell me what wires are what on the huds loom and if he knows were the plugs are,if they are even there in a S1?

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5549428
Share on other sites

lol hey mate yeah i have one worked out most of the wires the informantion is in my tool box at work i will grab it for u and let you know tomorrow its pretty cool sturb25 has one from factory and when i have the chance i will see where the other ones go from his car !!

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5551093
Share on other sites

lol hey mate yeah i have one worked out most of the wires the informantion is in my tool box at work i will grab it for u and let you know tomorrow its pretty cool sturb25 has one from factory and when i have the chance i will see where the other ones go from his car !!

Cheers mate really really appreciate the info!

Can't wait to get it working it looks so cool and will look way better when it's properly working :D

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5551438
Share on other sites

ok mate hey we go hope ur excite!!!!!!

brown- not sure maybe temp

blue- not sure maybe temp

red- permanent power

white/red- acc power

black- earth

white/green- illumination

green- vss (vehicle speed sensor)

so all powers u can get from the clock, and the hard one vss i got from behind the instrument cluster

the vss i didnt write down so if u dont know how to test i will have a look the next time im free and post again

apart from jonny8ball if anyone can tell me the last two wires location please post it as i wish to get that function working

thanks matt

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5556316
Share on other sites

  • 2 weeks later...
ok mate hey we go hope ur excite!!!!!!

brown- not sure maybe temp

blue- not sure maybe temp

red- permanent power

white/red- acc power

black- earth

white/green- illumination

green- vss (vehicle speed sensor)

so all powers u can get from the clock, and the hard one vss i got from behind the instrument cluster

the vss i didnt write down so if u dont know how to test i will have a look the next time im free and post again

apart from jonny8ball if anyone can tell me the last two wires location please post it as i wish to get that function working

thanks matt

Thanks so so much mate! Finally got it wired up and fitted and all works a treat :whistling:

I was thinking and i dont think we will get the ambient temp working on the hud as we dont have an ambient temp sensor in our cars. Unless we can get one from a series 2 and wire it up that way :)

Link to comment
https://www.sau.com.au/forums/topic/344095-help-with-a-hud/#findComment-5572097
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...