Jump to content
SAU Community

Recommended Posts

Hi Guys,

Looking for some troubleshooting advice, I have a 96 S2 R33 with turbo back exhaust, 12psi (turbotech mbc), Bosch 040, super spark coils and iridium plugs.

For the past couple of months the car has been 'hesitating' under full throttle, you put your foot flat, the car builds revs as normal then all of a sudden it jolts like you've taken your foot off the accelerator and slammed it back down again, revs will continue to build for another ~5 secs then it will do the same thing again. This happens the worst in 3rd, 4th and 5th, occasionally in 2nd, never in first and occasionally it won't happen at all. Typically the earliest I see this problem would be roughly 3000rpm in 3rd, it does not occur in neutral.

Things I've tried:

- Removing intake from turbo right up to throttle body, visually checking joiners for splits and replacing hose clamps.

- Tested BOV operation with a compressor, eliminated (blocked) BOV.

- Tested wastegate with compressor.

- Checked vac lines to boost controller, dissasembled boost controller and checked spring/ball moving freely.

- Checked IAC vac line for visual splits, checked boost guage/fpr vac lines.

- Visually checked SMIC for damage.

- Checked AFM voltage not maxing out via consult.

Anyone have some advice of what I can try next?

Cheers.

Edited by nicr4wks
Link to comment
https://www.sau.com.au/forums/topic/344433-hesitating/
Share on other sites

its R&R. your boost is too high for standard ecu so it chucks a sad. set your boost to 9psi max and you should be alright. my 33 used to do it at 10psi so im only running 7 now, havent had it happen since

Edited by XxNinjaxX
Link to comment
https://www.sau.com.au/forums/topic/344433-hesitating/#findComment-5551367
Share on other sites

 Car used to run on 13.5psi without issue, problem has occurred several months after going down to 12psi, also occurs at 10psi.

Doesn't R&R occur when the AFM is maxed out? Which if I'm correct is at 5v, according to Consult I'm only getting ~4.5v max on the AFM, I'll try logging tonight to get a better picture. Also, having hit R&R previously, there was a lot of black smoke and loud backfires from all the extra fuel, this is not happening. It feels more like the throttle body is snapping shut then opening straight back up.

Edited by nicr4wks
Link to comment
https://www.sau.com.au/forums/topic/344433-hesitating/#findComment-5551609
Share on other sites

It would seem that it is not R&R due to AFM maxing out, in 3rd the AFM was reading 4.12v when the jolt occurred, in 2nd I was able to read 4.80v without any jolt.

Do not believe it is the coilpacks, the hesitation is very different from failing coil(s)

Link to comment
https://www.sau.com.au/forums/topic/344433-hesitating/#findComment-5553329
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...