Jump to content
SAU Community

R33 Gtr Parts

BIT SUS
 Share

Recommended Posts

BIT SUS Mentor

BIT SUS

Posted
Posted

bout time I cleaned up the shed....

So up for sale are the following items:

1) Full set (5) of Genuine R33 Floormats, great condition - $150

Parts from a R33 GTR:

2) Front Swaybar with links $50 - upgrade for GTST?

3) Rear swaybar with links $80 - upgrade for GTST?

4) Rear Camber arms $40

5) Castor arms with Nolethane adjustable centres - $80

6) Airbox with K&N panel filter, all clips, and snorkle $150

7) Plastic Recirculation pipe that goes under the radiator - $50

8) Factory BOV's - $100 for both or $60 each - prefer to sell both

9) 3" high flow cat, good condition $100

10) Oval muffler 3"in, 3" out. Straight through, dent on one side, $30

11) RB26 cam cover, painted purple, missing a little paint - $50

12) "drift" gearknob, silver carbon pattern - $30

13) Genuine "GTR" badge for front grille, few stone chips on the red "R" clips intact - $20

14) 2 x 275/35/R18 Toyo R888 - bald - good for track days (0.5 seconds faster around Malalla apparently?) or burnouts? $50 - pick up only

15) Factory Lower intercooler rubber hoses $50 for both

16) Hicas Rack, with tie rods - was working fine - $80

Last but not least

17) Factory Plastic Air Diversion panel for R33 GTR (Very rare to find these days!) - $100

All parts located in Hope Valley SA 5090

Can organise freight at buyer's cost

Will trade/discount for the following items:

Carbon wing blade for R33 GTR

Boot interior clips

400R clear front indicator lense (I only really need 1)

Cheers,

Nigel

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/
Share on other sites
HIMMY Enthusiast

HIMMY

Posted
Posted

Hey mate I have a carbon wing blade fopr 33GTR, just has couple small chips in it but in good condition.....

Im keen on the Air diversion panel and floor mats for a swap..............BUT im located in Brisbane

PM me if your keen and we can nut out deal..

Cheers

Himmy

  • Nope 1
Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5562144
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
Hey mate I have a carbon wing blade fopr 33GTR, just has couple small chips in it but in good condition.....

Im keen on the Air diversion panel and floor mats for a swap..............BUT im located in Brisbane

PM me if your keen and we can nut out deal..

Cheers

Himmy

PM sent mate :P

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5562372
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
1) Full set (5) of Genuine R33 Floormats, great condition - $150

17) Factory Plastic Air Diversion panel for R33 GTR (Very rare to find these days!) - $100

On hold for HIMMY

Cheers,

Nigel

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5562394
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
Whats the air diversion panel?

Pics of that please. Fitted if it still is or dummy fitted.

Thanks

154414_177319712280944_123901314289451_627815_1545008_n.jpg

149850_177319672280948_123901314289451_627811_2071762_n.jpg

It sits between the base of the grille, and the bonnet latch

However it is on hold for HIMMY

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5563050
Share on other sites
seriesII Mentor

seriesII

Posted
Posted

hi, im ver interested in the air diversion panel, how much would it be to post to the gold coast 4214??.. thanx.. been after one for a while, but didnt want fibreglass.. :blink: thanx

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5563774
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
On hold for HIMMY

Cheers,

Nigel

It sits between the base of the grille, and the bonnet latch

However it is on hold for HIMMY

hi, im ver interested in the air diversion panel, how much would it be to post to the gold coast 4214??.. thanx.. been after one for a while, but didnt want fibreglass.. :blink: thanx

It only fits GTRs, and read above....

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5563835
Share on other sites
seriesII Mentor

seriesII

Posted
Posted (edited)

hi, ill take the air panel.. i know it fits gtr. i have a r33 gtr as well.. :P... hehe.. ill take it if falls through. im ready to pay now :P

Edited by seriesII
Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5564565
Share on other sites
BIT SUS Mentor

BIT SUS

Posted
  • Author
Posted
hi, ill take the air panel.. i know it fits gtr. i have a r33 gtr as well.. :down:... hehe.. ill take it if falls through. im ready to pay now :ph34r:

you have PM.

trade fell though on the floormats, and i have offered the Air diversion panel to seriesII

all items except BOVs and air diversion panel still for sale!

come on guys, make me an offer if you dont like the prices! i dont want to put this stuff in the bin when I move house!

Link to comment
https://www.sau.com.au/forums/topic/345185-r33-gtr-parts/#findComment-5572642
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Hendasto
      Lets play a game - What is causing my oil consumption?

      By Hendasto · Posted

      Hopefully it ends up being something manageable, like a hone, rather than a full bore—it would be a huge relief if it’s not as bad as it looks. Hang in there; these setbacks are annoying, but it sounds like you’re handling it as smartly as possible.
    • Hendasto
      Are RBs worth building reliability wise

      By Hendasto · Posted

      At the end of the day, it’s all about understanding the odds and being comfortable with the potential cost, whether it’s horsepower on a build or chips on a roulette table. And I have to say, the Laine example made me laugh—some people really do embrace that carefree, “roll and see” attitude!
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • MBS206
      New kid on the block

      By MBS206 · Posted

      https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
×
×
  • Create New...