Jump to content
SAU Community

My Stagea Goals & Budget

tjbix

By tjbix,
in Four Door Family & Wagoneers

 Share

Recommended Posts

southern_tango Proficient

southern_tango

Posted
Posted

Here you go, save you a couple of dollars

The x force dump fit, I use to use one

Cheap cat

Could use the exhaust and play approx $200 to get it modified to suit the stagea

http://www.skylinesa...ls-disc-rotors/

I HAVE IT !!! i bought it from Darren ,it fited perfect...atm i have it with a catco 3" cat and fujitsubo catback(very quiet),if you have the stock turbo get an electronic boost controller because with the 3" dump and catback turbo spools faster and with manual controller you will have lots of spicking.

In this game of getting more power money is the ruler but you can do it step by step..good flowing panel filter/pod and catback should be first in your list ,them you can get a EBC and put it up to 10psi(safe boost with stock turbo),at that moment you will feel you are starting to get real power since stock standard...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 GTR Speedo Drive , sensor type ?

      By GTSBoy · Posted

      It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...