Jump to content
SAU Community

Recommended Posts

Selling a fully built RB25det, this is a proven combo and has only done about 10,000kms. With its current setup using only a garrett gt35r, vipec ecu and supporting bolt ons it puts out a conservative 604rwhp.

This engine includes:

Tomei 264º 10.5mm lift inlet and exhaust cams

Tomei type B valve springs

Tomei adjustable cam gears

Fully ported and polished head

ARP 2000 12mm head studs (head and block drilled and tapped to take the larger studs)

Arias forged pistons

Spool H beam conrods

ARP 2000 rod bolts

ARP 2000 main studs

ACL race bearings

N1 oil pump

N1 water pump

Gates racing belt and tensioners

Fully blue-printed and balanced

Probably other stuff i cant think of at the moment also. Moving onto the next project is the only reason for the sale and the engine is still in the current car. The parts and machining alone add up to 20 000, asking for 10 000neg.

Genuine buyers only please call 0414 186 335.

Link to comment
https://www.sau.com.au/forums/topic/346458-built-rb25det-for-sale/
Share on other sites

Hi PHT33

sent you a PM.

my work hours are little all over the place to call during the week is it fine to work on weekend or just let me know what time is good to call.

any extra info regarding to the engine build more photos

would be awesome.

very interested

Call anytime, it will be alot easier to talk about all the work that has been done on this engine over the phone rather than type it all. If you want me to call you pm me your number, if youd prefer.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...