Jump to content
SAU Community

Recommended Posts

G'day guys

I've had by new baby for a week now and I'm well and truly smitten. I have a couple of quick questions however.

Firtsty: What do these buttons do. First thought was that it was the one on the right was for the rear wiper, but that's controlled by a knob on the wiper stalk, demist is a button next to the centre diff option. As for the selector switch on the left I have no idea.

IMAG0041-lores.jpg

Secondly: I'm trying to get to the TV tuner to have a look at the inputs as I'm looking into a TV tuner like the HR3 (side question: anyone know where I can lay my hands on one?) I'll start with the pic.

IMAG0037-lores-help.jpg

From reading these forums I'm lead to believe its behind 'X'. Getting A, B and C out was a simple affair once I located the nuts for B behind the spare wheel cover (10mm socket seems to fit absolutely everything on this car).

I left D where it was as I ran out of time to check how it came out and what was under it.

E and F where a simple affair.

I then got 4 little screw-clip's off (2 behind the E flap and 2 in the doorway off the photo to the left). The interior piece X looked like it should just fold out with some gentle persuasion, however it was stuck fast and I didn't want to risk breaking anything by pulling too hard. Have I missed something?

Finally Question C:

I've managed to burn through 2 tanks of fuel in quick succession, getting about 340-350k's per tank. I'm putting crap fuel economy down to an excited right foot (going from a non-turb RB30 to RB25DET can have that effect). Once I restrain myself, at what point should I look at replacing things like sensors? I know these things aren't the most fuel efficient but it seems to get into the low end of the spectrum very quickly indeed. Engine is all stock (not even had the boost solenoid bypassed). With Leather seats I expect she would be pretty heavy.

Thanks is advance guys!!

Hi mate

The dial on the left adjusts the angle of your headlights up or down, as for the switch on the right i think i remember reading that it turns on the window/mirror heaters? Dont know for sure though. As for the fuel economy there are a heap of threads on here about that see if you can find them with search, but 350kms seems pretty normal from what other users have posted for stock cars, you can try getting your O2 sensor checked to make sure it is working correctly when I first got mine I was getting very bad economy and an intermittent warning light on the dash caused by a shagged O2 sensor

Thanks for that guys. Be sure to play with the headlights in the alley near my place next time I take her out at night.

Any ideas on getting behind that trim? Have I missed something or does it just need a little more less-gentle persuation?

Bentwagon I dont think so, I looked into trying to get mine around there, not much room at all depending on the size of the amp, also you dont want an amp under a piece of interior like that they put out alot of heat, best place imo is under the driver side seat, the floor is completely flat on that side whereas there is a bump under the passneger chair so not as much room, also if u want advice on where to feed ur power line through when u get too it hit me up i did all mine myself and found an awsome completely concealed place to go through.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...