Jump to content
SAU Community

Recommended Posts

Hi guys i got a new R33 3days ago and she is blowing smoke after hard acceleration so i got looking and the old owner blocked of the rocker cover breathers. would this cores a s**t load of smoke..since unblocking it the smoke has cleared up heps but can still see it

mods are

hiflow turbo

front mount

3" zorst

thats all i know in the way of mods

Link to comment
https://www.sau.com.au/forums/topic/346894-r33-blowing-smoke/
Share on other sites

Probably, I'd be more worried about what further damage has been caused by blocking the breathers. White smoke is usually coolant (head gasket etc), blue is usually oil (piston rings etc) and black is usually caused from running the engine rich (not necessarily a bad thing).

you really should know what mods are done to it before you buy it...

if your unsure of what blowing smoke could mean then you pretty much need some help and eventually I reckon this thread will say 'take it to a decent workshop'...

when was last oil change

who knows....i'am yet to get around to it

the smokes blue i think..not useing water but dose over heat has 2X 12" thermos and has alloy radiator and has a intercooler in front of it all am going back to stock setup

you really should know what mods are done to it before you buy it...

if your unsure of what blowing smoke could mean then you pretty much need some help and eventually I reckon this thread will say 'take it to a decent workshop'...

i can tell you why is it blowing smoke but just wanted to see if anyone els would say it

so looks like the turbo has gone and the blocked of rocker cover breather would of been just adding to it ( now that it was blocked off i just hope the seals have not been push out)

i know this is kind of off topic but not really

but i'll ask anyway

my car will sometimes blow a puff of white smoke when i'm in traffic and take off sometimes and maybe drop the clutch a bit early like it bogs down a tiny bit and blows a bit of smoke

is that normal?

fine on acceleration and normal driving though

Hey was just wondering about my car, ever since its been tuned its been blowing alot of black smoke. Like i mean i wash the car and within 3 days the whole back of the car is black. Which looks really bad considering the car is white. Anyway what im trying to get at is do you think its possible the tuner has made it a bit over rich? and could get away with it running a bit leaner? or the tune has slightly gone out of wack since it was done(9 months ago) and needs to be redone?

Hey was just wondering about my car, ever since its been tuned its been blowing alot of black smoke. Like i mean i wash the car and within 3 days the whole back of the car is black. Which looks really bad considering the car is white. Anyway what im trying to get at is do you think its possible the tuner has made it a bit over rich? and could get away with it running a bit leaner? or the tune has slightly gone out of wack since it was done(9 months ago) and needs to be redone?

yep i would say it is running very rich

The pressure built up would cause oil to be forced down the valve stem seals...also more likely the pressure in the sump would restrict the turbo oil return and pressurise the turbo housing forcing oil out the turbine oil ring. I wouldn't expect it wouldn't damage anything in the short term however if it has been doing it for a while the caked and burnt oil could have worn the turbine oil ring.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...