Jump to content
SAU Community

Recommended Posts

Moving after Xmas so I'm clearing out the shed

Can deliver around Brissy area or pickups from either Wooloongabba-Brisbane or Maroochydore-Sunshine Coast

Courier at your expense

Will only trade for roof racks [that go across stock rails] for my '99 Stagea :happy:

All rim's are 5 stud/114.3 PCD except the single Driftech which is multistud [4 or 5 stud]

-Pair of reclineable race seats VGC

Unknown brand-no rails but they have holes to attach them

Black & grey mesh material

Bolt holes 330mm & 270mm apart

$300 ono

-Carbon fibre drift style wing VGC

No damage-has some ery light scratches in top clear coat

Was fitted on r33 gtst Skyline but can be fitted on most cars

Includes all parts needed to fit it-1440mm wide 200mm high

$260 ono

-BLITZ atmo blowofff valve with RB25 adapter VGC

nice crisp sound-chrome paint

$180 ono

-Go Fast Bits [GFB] silver/chrome blow off valve with rb25 adapter plate

Works perfectly

Vents to atmosphere-can't be setup as plumb back

$160 ono

-ONE new gold Driftek rim 17x9 +30 PCD 114.3 [5 stud only-not multistud]

Has had tyre fitted & removed shortly after

No scratches/scuffs/gutter rash at all

$250 ono

-17x7 +35 silver 5 spoke wheels VGC

No damage or gutter rash-only a few light scuffs/scratches on paint

missing one centre cap-were fitted on a my '99 Stagea

two yokohama tyres are about 80% but camber worm

other random tyres arent roadworthy

all tyres are 225/50/17

$600 ono

-2xWORK "Equip" 16x8 +40 two piece alloy rims with skid tyres VGC

Very lightweight-perfect offset for r33 GTSt Skylines

$150

-4xStock r33/s14 16x6.5 wheels-tyres are all fkd-will sell pairs

$200 ono

-3xRandom 16x7 +40 alloy rims in good condition-good solid skid rims-look ok

can chuck in a steel rim that's same size

$80

-HKS pod filter with rb25 adapter [needs new filter]

$80 ono

-Stock VGC series 1 r33 spoiler-original burgandy paint

light works-light wiring is allgood

$80 ono

-RB25 stock 2.5" dump/frontpipe/cat converter [two of each-frontpipe should fit RB20's too]

$120 ono for all-will sell parts seperately

-r33 gtst HICAS module-no damage

$60 ono

-Stock '95 Nissan Stagea[skyline wagon] full exhaust-should fit r33/r34's

$80 ono

-Autoteknica 350mm black/light grey leather steering wheel VGC

In good condition-horn,etc included

35cm in diametre-centre of mounting holes are 70mm across & 35mm apart

$60 ono

post-59075-0-93842100-1292663189_thumb.jpg post-59075-0-05691500-1292663227_thumb.jpg post-59075-0-78466200-1292663242_thumb.jpg

post-59075-0-08534100-1292664037_thumb.jpg post-59075-0-31018000-1292664413_thumb.jpg

post-59075-0-33358100-1292664479_thumb.jpg post-59075-0-36645900-1292664553_thumb.jpg

post-59075-0-78746500-1292664642_thumb.jpg

post-59075-0-60753200-1292664731_thumb.jpg post-59075-0-92009400-1292664885_thumb.jpg post-59075-0-48650700-1292664899_thumb.jpg post-59075-0-00010600-1292664928_thumb.jpg

post-59075-0-33372900-1292664969_thumb.jpg post-59075-0-56371000-1292665049_thumb.jpg post-59075-0-31698800-1292665064_thumb.jpg

post-59075-0-46188100-1292665104_thumb.jpg post-59075-0-11374100-1292665126_thumb.jpg

Would you take $160 and posted to sydney express as of tomorrow for the blitz BOV?

PM me if you want to talk further, i want it asap.

Edited by FST513

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...