Jump to content
SAU Community

2X Drifteks 17X9.5+18, Rb26 Highmount Manifold, Siemens 750Cc Topfeed Inj, Dump Pipe To Suit 3076, Spal Pwm, New El Coil Pack With Leads, Billet Pully

PIG747
 Share

Recommended Posts

PIG747 Mentor

PIG747

Posted
Posted

hey guys have the stuff laying around taking up space.

2x 17x9.5 +18 drifteks there matt black if u want to change colour, pass powdercoating charge $50 a rim any colour you want, $450 for the pair

gcg rb26 stainless highmount manifold these retail $1100 im after $300

6x siemens 750cc topfeed injectors suit rb20,26 ca18 and if change rail it will suit sr20 rb25, these only done 200ks since new to small 4 my application after $450firm thats half price of a new set

new custom 3" dump pipe to suit highmount gt30 sieres turbo with 4 bolt flange, was on my rb26 gt3076 in my 180sx but its steampipe easily modified to suit sr $150

brand new spal pwm fan control unit, best on the market, its a mini ecu that controls ur thermo fans, it has low and high speed, connects to ur stock coolant temp sensor, even gives you fault codes, can run a/c fans aswell, i paid almost $300 last year but after $180 firm my loss your gain

new ford el coil pack with new top gun leads to suit any rb sieres engine $150 the lot

billet light wieght alternator, water and power steer pump pullys blue in colour brand new in box suit rb engines but i think it can fit sr $100 the lot

pair of charge speed sideskirts to suit s13 silvia $50 4 the pair

brand new copy 044 fuel pump, have mates running in the 9's with there rotarys using these pumps 4 the last 2 years $100

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      Front Tyres on R34 GTR, fitment, etc, *question*

      By Kinkstaah · Posted

      I have a question with regards to R34 GTR guards. All the info here is quite old. Useful, but old. At what point does the bumper itself become a clearance issue with wide wheels on a R34 GTR, specifically the part I've drawn in red here: All of the info that people post about implies that 285 is as far as you'd go before scrubbing becomes an issue, but they speak of hitting the inner plastic liners, not the bumper itself. Just how wide could you go if you took the liners out? Has anyone done it? I have been messing with my own car and spacers and heavily cursed my lack of planning, but I might not feel so bad if there's actually no gains to be had by going a GTR guard and front bar combination for $5k+ of money I do not have after spending about that much already on my solution which now has problems. (Woo) At least I now know why GTR guards and bumpers flare out like this over their GTT lesser cousins. I feel that in 2024, someone has gone further and attempted to run 315's or somesuch on the front of a R34 GTR. If you have, please post. If you're tried and failed for some other reason definitely post so I feel better about my mistakes
    • Kinkstaah
      URAS Type R R34 GT GTT Widebody Front Guards

      By Kinkstaah · Posted

      Genuine URAS Type R front guards in FRP. These will fit a GTT. They will only fit a GTT. If you have a GT or GTT and want wider fenders with a Z tune look up top, this is what you want. You use this with a regular GTT fitment bar. Not a GTR bar. They fit GTT guard liners and plastics, not GTR items. So if you're reading this thinking "Ah! I have a GTT or GT and want wider front guards that bolt directly on, but do not want the hassle of changing my bonnet and bumper and plastics and undertrays or anything else, this is what you want. The fitment is annoyingly perfect. I really would rather someone pick these up in person and not ship them. SE Melb.
    • admS15
      MLR's Bogan cruise ship

      By admS15 · Posted

      FYP
    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      Why didn't you buy the one I originally linked in QLD which was about 18k and in massively better condition with about 30k of tastefulmods holyshitmygodjesuschristman.
    • pogman
      Big Brake Kit for ECR33

      By pogman · Posted

      hey mate so i was in a similar position needing something better than oem for track but also wanting it to look the part, i went for APG APG Performance Brakes they are a solid price and i have had no issues with any of the components from them. the rotors and pads can be swapped out for all the usual brands just ensure you are getting the right sizes. i have just a front kit on my car. i would recommend upgrading to a bigger master cylinder as they are a bigger calliper so you can actually notice some increased braking performance 
×
×
  • Create New...