Jump to content
SAU Community

Recommended Posts

hey guys,

need a change so im selling my baby, here are the specs:

Nissan Cefiro 1988, Factory RB20DET - DRIFT SPEC

- 5 speed manual – converted from auto with RB20 box

- Fully adjustable Racing logic coilovers with spring rates 10kg 8kg

- Full Uras body kit

- 18 * 8 inch wheels all round 235/40/18 Nankang tyres

- Custom 3 inch turbo back exhaust. It sits real high up so it doesn’t show and it has a flange at the end which is used to attach either 3†twin pipes or a hot dog muffler

- Hybrid front mount intercooler

- Kaaz 2 way diff

- Custom tailshaft

- Apexi AVCR boost controller

- HKS Pod Filter

- Blitz boost gauge

- Front and rear strut braces

- Bosch 040 fuel pump

- Drift hand break button

- Brass button ceramic clutch

- Sports steering wheel

- Alpine head unit

- Viper alarm with auto start feature

- 140,000 k’s on the clock – imported the car 2 years ago at 66,000

- Blitz gear knob

- 2 Month old Heavy Duty Battery

- Power windows

- Power mirrors

- Air conditioning

- Power steering

- Reflective Window Tint

- Car made 164.1 kilowatts on 13 pounds of boost with dyno sheets at chasers

- Car serviced every 5,000 k’s with good oil and spark plugs and diff serviced every 4,000k’s to keep it working in perfect order

SLIGHT front bar damage not shown in photos.

im looking for $$11000

call or sms me on 0402143495

steven.

here for pics.

http://www.skylinesaustralia.com/forums/topic/164793-fs-88-nissan-cefiro/page__p__3072763__fromsearch__1

Link to comment
https://www.sau.com.au/forums/topic/349271-fs-88-nissan-cefiro/
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...