Jump to content
SAU Community

Recommended Posts

Just got sent this information emailed by an associate in London on the deal behind the "blacking out" & "camouflaging" of prototype cars during development. Its interesting to note that some of those blacked out cars we sometimes see in car magazines may not be a "new model" thats just about to come out but could indeed be one of around 200 different prototype vehicles that are required in the development of each new production model.

Camouflage and Disguise of Cars

How Car Makers Hide New Models from Prototype Paparazzi Spyshots

Mar 19, 2008 Simon McBride

Launching a new car is all about glitz and glamour but if Prototype Paparazzi get the chance they will sell spyshots of the car even when it's disguised by camouflage.

When launching a new car, manufacturers must test the vehicle both on road and on track to get the set-up exactly the way they want it. So camouflaging cars against snooping paparazzi is all important.

But this is not always as straight-forward as it seems, as they want to keep the vehicle a secret until its official public unveiling.

Camouflaging Cars against Prototype Paparazzi

This is mainly the fault of the car Paparazzi as they are always on the look out for a good shot – these specialist photographers are called prototype hunters, or simply photo spies.

The car manufacturers fight against early pictures of their vehicles by camouflage and disguise tactics.

A spokesman from Vauxhall said: “There is usually a special team responsible for camouflaging prototypes – their job entails figuring out which of the cars characteristic lines should be kept hidden the longest from Prototype Paparazzi. The model is then disguised by masking tape and plastic parts, which are stuck on to hide unique design lines.”

The replacement car for the Vauxhall Vectra, the new Insignia has been going through this process. The car is due to be given its public unveil in July at the 2008 British Motorshow in London UK, but spy shots have already come out.

When trying to foil the Paparazzi the design team will build a wooden model as a cast to form the plastic camouflage parts. This is needed for around 200 test cars that have to be disguised in the run-up to production.

And there is more bad news for the Prototype Paparazzi as the car-makers are pulling out all the stops.

Flimmies a Better Prototype Disguise

The top brands claim that the disguising job will soon be even better as they have discovered a technique called ‘Flimmies’. This is a new type of camouflage where the pattern creates a flickering effect.

No matter how well a model is disguised, a common give away are the Headlamps and rear lights as most enthusiasts will be able to tell what a is car by only seeing a glimpse of these.

Getting round this is a problem for car manufacturers as vehicle licensing authorities stipulate that a car’s – even a prototype’s – headlights, brake lights and all other exterior functions must meet legal regulations.

One of the most important characteristics of a new car is its exterior design and the makers want to keep it a secret until the marque is ready to show it off at its public unveil.

Hide and Seek

So, the game of hide and seek between the car manufacturers and the Prototype Paparazzi is set to continue...

So some of those blacked out cars could be the finished product about to be released & some could be 200 "steps away" from being fully developed which i imagine would be years.

I always thought it was a bit silly to go to such extreme lengths to hide a new model after completing it - its not as though you can change it then - bit late for that :)

Now I see how important it is !!

Its actually more important on all of the prototypes during a new cars development - as I am sure that a lot of very important "engineering direction" & "breakthrough technology" is "discovered" "thought through" & "stumbled upon" during this time that you dont want your competitors knowing about.

It also nicely outlines that car manufacturers with say 5 models in development will have literally hundreds of prototype vehicles on the go over a 2 or 3 year period - with all of the prototype vehicles for the series twos & limited edition upgrade tweaks being pulled from the production line :)

Interesting stuff !! ... I knew they went through a lot of prototype cars during development but I would have never guessed 200 !!! :)

... cheers malcolm :)

200 prototypes is quite the number, I wonder what becomes of all these known prototypes...

The heartbreaking thing about new car development is bringing them to THIS country... ADR states a vehicle built overseas must be brought in for ADR testing. Once passed and cleared the test model must be destroyed in full by means of crushing.

I got to sit in the Red GTR brought in by Gibson motorsport a few weeks before it got the crush :( apparently they were trying to work out a deal where it could become a track only vehicle yet apparently it was not worth the effort. FYI commonwhores do not need to be crushed once tested :P Piss ant red necks get to have theirs I guess, the price of being superior is that our first born must die lol.

Lol anyway interesting read, cheers.

200 prototypes is quite the number, I wonder what becomes of all these known prototypes... Once passed and cleared the test model must be destroyed in full by means of crushing.

... Hi & thank you for your reply ... :) ...

... 200 is heaps ! ... as far as what happens to all the prototypes ? ... I know with my car that it was returned (almost) to OEM spec which made it legal to ship to Australia as a grey import ... most see out their days as test cars & continue to be used ... as long as the chassis or floor pan is identical they will even be used in "cross over" models like the Tida from the Pulsar ... you can see in mass production how important it is to have a lot of generic parts that will not only fit between cars within a model range but also between cars of a different category ... I had a the Skyline a GTi-R & my Super S Micra all at the same time ... things like the rear view mirror petrol flap release lever are identical as well as the power mirror adjuster switch on the Skyline & Micra ... not too mention the countless other components within the electrics & fasteners ...

... yes ADR regulations are tough but I guess there needs to be a very strict set of parameters that applies to everyone otherwise itd be a field day of interpretation with everyone making up their own set of rules ...

... theres a great true story in the 1980's regarding a whole bunch of the Nissan Australia 200B Rally Cars that werent allowed to stay in Australia due to ADR regulations & Nissan Japan refused to ship them back to Japan where they had been developed ... so after Rally Australia finished one year somewhere in a pine forest near Port Macquarie or Coffs Harbour the entire collection of cars was put on a barge & taken miles out to sea & pushed off - dumped into the ocean !! ... crazy ... !!! ... i know - WTF ... :O ...

... such a shame ... what a waste ... oh well theyre probably being used as accommodation by fish lobsters & sea slugs ...

... cheers malcolm :) ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...