Jump to content
SAU Community

Recommended Posts

:action-smiley-069: Hello Everyone,

Been lurking for a while, just thought I would share our R14(S14 with full GTR power/drive train) Here are some specs.

full roll cage, proper bracing in the right spots

r34 gtr brembos front and rear, raybestos motorsport pads, brake ducting

R32GTR front suspension, caster changed to 7degrees through custom upper control arm mounts. Stock swaybar, Stock Upper Arms, Stock lower arms, Stock tierods, Quaife Front LSD, urethane swaybar bushings

R33GTR rear suspension, full adjustable links, R32GTR stock swaybar, nismo LSD

Tires are Hoosier A6 (Autocross compound for time attack) and BFG R1 (enduro + lapping) 275/35 on a 18x10.5

Torque Split is running fixed with 40-55-60psi in the transfer case (ATTESSA eliminated) depending on preference and tires/track condition

its a built motor, borg warner airwerks twinscroll turbo, expecting 680-700hp on E85 (e85 helps response and spool), good oiling system and cooling is getting improved right now

Car will soon be rocking new EFR Turbo.

If you have any questions feel free to ask. ;)

Before the race changes.

r14morning2.jpg

r14dyno4.jpg

DSC_0135%20copy%20copy.jpg

DSC_0113%20copy%20copy.jpg

now some newer pics with the new V mount set up and other race mods.

vmount4.jpg

vmount3.jpg

vmount2.jpg

R14bashbeamvmount.jpg

Some aero changes.

frontsplitter1.jpg

nose-1.jpg

nose-2.jpg

Rear and under side

update00.jpg

Street driving :rofl2:

27068_10150175053810113_704920112_12332350_5243843_n.jpg

Thanks for reading.

Regards

Jon

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/350932-hello-everyone/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...