Jump to content
SAU Community

translation needed for TSC system


Recommended Posts

Hi Guys,

i just received a Grid Dash Dancer Torque Split controller from japan, only problem is i can't read 1 symbol of japanese, and i don't want to screw this up

specifically i need to know the wiring colours, where they attach, any warnings and what the buttons do (although i can guess what the buttons do :(, if i can get all of it translated that would be awesome!

can somebody please translate these for me into english,

Link to comment
https://www.sau.com.au/forums/topic/35155-translation-needed-for-tsc-system/
Share on other sites

here you go, should be bigger (i have much bigger, but i am not sure of the limits of the server)

It is for the R33 as well, if they are car specific (all though the picture of the wiring loom looks to be R33)

I am not familiar with the device but I translated what I can.

It seems to me that there are black, yellow, red and green cable coming from TSD control unit (see pic).

Connect red cable to existing green/red cable.

Connect green cable to existing black/pink cable

Cut existing light blue cable then

Connect Yellow cable to the light blue cable on the connector (harness) side

Connect Black cable to the other side of the light blue cable

You need to screw down the dancer dash on left hand side of the E-TS control unit together

It says it has three settings: normal (no light), 50:50 (green light) and 0:100 (red light)

Hope this helps.

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...